What absorbs at 1132 cm⁻¹ in an FTIR spectrum?
Una banda cerca de 1132 cm⁻¹ puede apuntar a varios grupos funcionales. A continuación se muestran las asignaciones más probables, clasificadas por cuánta evidencia publicada respalda cada una — cada una trazable a literatura (DOI) y validada de forma cruzada con nuestros más de 130,000 espectros de referencia y grafo de conocimiento.
Backed by 8 cited sources
Respuesta rápida
A band near 1132 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Posibles asignaciones de grupos funcionales
| Grupo funcional | Hechos de respaldo | Fuentes citadas | Confianza máxima |
|---|---|---|---|
| Amide | 3 | 3 | 1,0 |
| Methoxy (OCH3) | 3 | 3 | 1,0 |
| Methacrylate | 3 | 3 | 1,0 |
| C-O single bond | 3 | 3 | 1,0 |
| Acetate | 3 | 3 | 1,0 |
| Secondary amine | 2 | 2 | 1,0 |
| C n single bond | 2 | 2 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Sulfate (SO4) | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 0,9 |
La clasificación refleja la evidencia acumulada de la literatura, no una única regla autorizada. Siempre confirme según el contexto de su muestra.
Materiales posibles
| Material | Picos de apoyo | Grupos superpuestos | Fuentes citadas |
|---|---|---|---|
| polysaccharide | 1132, 1637, 1320 | Methacrylate, C-O single bond, Methoxy (OCH3) | 1 |
Los materiales se muestran solo cuando el mismo grupo de literatura respalda esta banda y al menos un pico característico adicional.
Lógica de espectro
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 1132 cm⁻¹ is usually not enough for material identification by itself.
Uso en el mundo real
Este tipo de consulta es común en la identificación de polímeros, cribado de plásticos desconocidos, resolución de problemas de control de calidad, verificación de materiales reciclados y revisión de asignación de picos respaldada por la literatura.
Errores comunes
- Tratar una banda aislada como prueba de un material sin verificar al menos uno o dos picos de apoyo.
- Ignorando superposición: múltiples grupos funcionales pueden contribuir cerca del mismo número de onda.
- Omitir la validación cuando los aditivos, las mezclas, la oxidación o la contaminación puedan distorsionar el espectro.
Consejo de verificación
Cuando persista la ambigüedad, valide la hipótesis con DSC, GC-MS o TGA, especialmente para mezclas, muestras degradadas y polímeros rellenos.
Literatura detrás de estas asignaciones
-
Acetate confianza 1,0
“This means that increasing the J Mater Sci: Mater Electron cm-1 3-, the absorption peak at 1132 is peak of NO the characteristic peak of C-O bond, and the cm-1 absorption peak at 883 it may be due to the”
Annealing temperature on the microstructure and magnetic properties of magnesium–cobalt ferrite prepared by sol-gel self-propagating method DOI: 10.1007/s10854-020-04778-6 -
Acetate confianza 1,0
“cm-1) corresponding to the replacement of OH groups by NH2 groups on shoulder (3345 cm-1, cm-1,and cm-1 the surface of CG [8].We can also identify bands at 1132 1078 1013 cm-1, 1078 cm-1,and 1013 cm-1 the surface of CG [8].We can also ident”
Influence of Reduction with NaBH4 and HCl in Obtaining Amino Derivatives of Cashew Gum and Cytotoxic Profile DOI: 10.3390/polym15132856 -
Amide confianza 1,0
“The cm-1, negatively weighted peak at 1245 was due to amide III, and the negative weighted peaks around 1132 and cm-1 vibration31,32.”
Soil-applied selenite increases selenium and reduces cadmium in roots of Moringa oleifera DOI: 10.1038/s41598-020-77350-1 -
Sulfate (SO4) confianza 1,0
“February FTIR spectra of BSA, sodium sulfate, and goethite14,15,23,26,36,37 cm-1, spectrum that there is a strong absorption band at 1132 a under y (cm-1) which corresponds to the asymmetric sulfate stretching Wavenumber Vibrational peak as”
Kim 和 Grassian - 2023 - Analysis of microand nanoscale heterogeneities w DOI: 10.1039/d3em00005b -
Silicon (Si) confianza 1,0
“cm-1 cm-1 690 (curve 1) and 908 (curve 2) peak are 1267 3475 1473 1643 Si-Oassigned to the Si-O symmetric stretch and to the 1132 (3)”
Rangelova 等 - 2011 - MethylcelluloseSiO2 hybrids sol-gel preparation DOI: 10.2478/s11532-010-0123-y -
Amide confianza 1,0
“The spectrum for PEI cm-1 cm-1 shows the bands at 3263 (N-H stretch), 1474 (N-H bending), cm-1 cm-1 1132 (C-N stretch) and 750 (N-H bending) typical for this”
Shan 等 - 2020 - Polymer structure and property effects on solid di DOI: 10.1016/j.ijpharm.2020.119884 -
Acetate confianza 1,0
“1131.90 cm-1 are assigned to the stretching vibration of C-O-C in xanthate.”
Yu 等 - 2016 - The Desulfurization of Magnetite Ore by Flotation DOI: 10.3390/min6030070 -
Amide confianza 1,0
“This is indicated by the presence of the C-N stretch cm-1 at 1132 in the TEPA-treated CQD as compared to that of untreated CQD (PL 4 180).”
de Yro 等 - 2019 - Hydrothermal Synthesis of Carbon Quantum Dots from DOI: 10.1063/1.5094310
¿Tiene un espectro con esta banda?
Cargue su espectro FTIR y obtenga un informe de interpretación completo — asignaciones de picos con citas bibliográficas, coincidencias de librerías y una cadena de evidencia con calificación de confianza — en segundos.