Was absorbiert bei 1091 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1091 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1091 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 5 | 5 | 1,0 |
| Phosphate (PO4) | 5 | 5 | 1,0 |
| C-O single bond | 4 | 4 | 1,0 |
| Silicon-oxygen (Si-O) | 4 | 4 | 1,0 |
| Methoxy (OCH3) | 3 | 3 | 1,0 |
| Methacrylate | 3 | 3 | 1,0 |
| Acetate | 3 | 3 | 1,0 |
| Ring structure | 2 | 2 | 1,0 |
| Aromatic ring | 2 | 2 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Secondary amine | 2 | 2 | 1,0 |
| C-S single bond | 1 | 1 | 1,0 |
| Chitosan | 1 | 1 | 1,0 |
| Phosphorus | 1 | 1 | 1,0 |
| Carbonate | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| PET | 1091, 1408, 800 | Alkyl C-H, C-O single bond | 1 |
| Polypyrrole | 1091, 1700, 400 | Alkyl C-H | 1 |
| clay | 1091, 1736, 2855 | Silicon-oxygen (Si-O), Alkyl C-H | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1091 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Alkyl C-H Vertrauen 1,0
“The peak at ct cm-1 1091 is due to C-H deformation vibration whereas cm-1 cm-1 the peaks at 1140 and 1354 are due to the C-N”
Thakur 和 Lokhande - 2017 - Effect of dip time on the electrochemical behavior DOI: 10.1515/epoly-2016-0160 -
Alkyl C-H Vertrauen 1,0
“Due to C-H deformation vibration”
Dip time-dependent SILAR synthesis and electrochemical study of highly flexible PPy-Cu(OH)2 hybrid electrodes for supercapacitors DOI: 10.1007/s10008-016-3502-2 -
Vertrauen 1,0
“A wide, high, cm-1 and intense absorption band present at 1091 might suggest the stretching vibration of (Si-O-C) and (Si-O-Si) bonds present in the silane, while the two peaks around 816”
Enhanced Coating Protection of C-Steel Using Polystyrene Clay Nanocomposite Impregnated with Inhibitors DOI: 10.3390/polym15020372 -
Vertrauen 1,0
“4 Previous FTIR data of alkoxy SiNPs show a relatively sharp Si-O-C peak, observed 1091cm-1, at rather than the typically broad Si-O peak observed in most alkyl capped SiNPs (Shirahata et al., 2009, Holmes et al., 2001, Pettigrew et al., 20”
The effect of alkyl chain length on the level of capping of silicon nanoparticles produced by a one-pot synthesis route based on the chemical reduction of micelle DOI: 10.1007/s11051-013-1425-8 -
Phosphate (PO4) Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Evidence for Mild Diagenesis in Archaeological Human Bones from the Fewet Necropolis (SW Libya): New Insights and Implications from ATR–FTIR Spectroscopy DOI: 10.3390/app13020687 -
Phosphate (PO4) Vertrauen 1,0
“In the spectral domain that is usually specific to the triply degenerate asymmetric stretching mode vibration (υ3) of the (PO43-) grit is observed the presence of two important maxima is observed at around 1031 and 1091 cm-1, respectively.”
Physicochemical Characterization of Europium-Doped Hydroxyapatite Thin Films with Antifungal Activity DOI: 10.3390/coatings12030306 -
Alkyl C-H Vertrauen 1,0
“The band at 2877 is attributed to cm-1 peak at 1091 stretching vibrations of the aliphatic C-H groups.”
Hamisu 和 Celik - 2017 - Poly(AN-co-PEGMA)hBNNaClO4 composite electrolyte DOI: 10.1515/epoly-2017-0022 -
Acetate Vertrauen 1,0
“The peaks at 1263 cm-1 is the characteristic peak of CO-O-C, and the characteristic peak of C-O-C is at 1091 cm-1.”
Surface Modification of Carbon Microspheres with Guanidine Phosphate and Its Application as a Flame Retardant in PET DOI: 10.3390/polym12081689
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.