What absorbs at 1002 cm⁻¹ in an FTIR spectrum?
Et bånd nær 1002 cm⁻¹ kan peke på flere funksjonelle grupper. Nedenfor er de mest sannsynlige tildelingene, rangert etter hvor mye publiserte bevis som støtter hver — hver enkelt sporbar til litteratur (DOI) og kryssvalidert mot våre 130 000+ referansespektre og kunnskapsgraf.
Backed by 8 cited sources
Raskt svar
A band near 1002 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mulige funksjonelle gruppe-tilordninger
| Funksjonell gruppe | Støttende fakta | Siterte kilder | Toppkonfidens |
|---|---|---|---|
| Silicon-oxygen (Si-O) | 5 | 5 | 1.0 |
| Silicon (Si) | 4 | 4 | 1.0 |
| Carboxyl (COOH) | 2 | 2 | 1.0 |
| Amide | 2 | 2 | 1.0 |
| Ketone | 1 | 1 | 1.0 |
| Ester | 1 | 1 | 1.0 |
| Carbonyl (C=O) | 1 | 1 | 1.0 |
| Methoxy (OCH3) | 1 | 1 | 1.0 |
| Methacrylate | 1 | 1 | 1.0 |
| C-O single bond | 1 | 1 | 1.0 |
| Acetate | 1 | 1 | 1.0 |
| Secondary amine | 1 | 1 | 1.0 |
| N h | 1 | 1 | 1.0 |
| Hydroxyl (O-H) | 1 | 1 | 1.0 |
| Metal oxygen | 1 | 1 | 1.0 |
| S eq o | 1 | 1 | 1.0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1.0 |
| Anhydride | 1 | 1 | 1.0 |
| Alkene (C=C) | 1 | 1 | 1.0 |
| Alkyl C-H | 1 | 1 | 1.0 |
Rangeringen gjenspeiler akkumulert litteraturbevis, ikke en enkelt autoritativ regel. Bekreft alltid mot prøvekonteksten din.
Mulige materialer
| Materiale | Støttetopper | Overlappende grupper | Siterte kilder |
|---|---|---|---|
| PDMS | 1002, 873, 1080 | Silicon-oxygen (Si-O), Silicon (Si) | 1 |
Materialer vises kun når samme litteraturbase støtter dette båndet og minst en annen karakteristisk topp.
Spektrum-logikk
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 1002 cm⁻¹ is usually not enough for material identification by itself.
Virkelig bruk
Denne typen forespørsel er vanlig i polymeridentifikasjon, screening av ukjent plast, feilsøking i kvalitetskontroll, verifisering av resirkulert materiale og litteraturstøttet gjennomgang av topptilordning.
Vanlige feil
- Behandle ett isolert bånd som bevis på et materiale uten å sjekke minst en eller to støttende topper.
- Ignorerer overlapping: flere funksjonelle grupper kan bidra nær samme bølgetall.
- Hopp over validering når tilsetningsstoffer, blandinger, oksidasjon eller forurensning kan forvrenge spekteret.
Verifiseringsråd
Når tvetydighet gjenstår, valider hypotesen med DSC, GC-MS eller TGA, spesielt for blandinger, nedbrutte prøver og fylte polymerer.
Litteratur bak disse tilordningene
-
Alkyl C-H konfidens 1.0
“2 759cm-1 1″-H 2′, 2″-H) confirming C-H and 2, are giving cross peaks that there is The peaks at 1002, 966, 909 and are due to wagging of”
Reactive grafting of 3-octanoylthio-1-propyltriethoxysilane in styrene butadiene rubber_ Characterization and its effect on silica reinforced tire composites DOI: 10.1016/j.polymer.2019.121693 -
Anhydride konfidens 1.0
“cm-1, At 1002 the peak shows CO-O-CO stretching, which indicates the presence of an anhydride group.”
Fatima 等 - 2021 - Extraction and Chemical Characterization of Humic DOI: 10.3390/su13168969 -
Silicon (Si) konfidens 1.0
“3: the symmetric stretching at 3057 and 3018 the ¼¼CH cm(cid:2)1 band centered at 1002 is associated with the Si-O-Si asymmetric and symmetric stretching at 2974 and 2935”
Aresta 等 - 2012 - Initiated-chemical vapor deposition of organosilic DOI: 10.1116/1.4711762 -
Silicon (Si) konfidens 1.0
“increase in their intensity in the spectra of the sample exposed to the temperature of 1000 °C and a clear shift of the maximum intensity of the main band from 1002 to 1032 cm-1, °C and a clear shift of the maximum intensity of the main ban”
Dehydroxylation of Perlite and Vermiculite: Impact on Improving the Knock-Out Properties of Moulding and Core Sand with an Inorganic Binder DOI: 10.3390/ma14112946 -
Amide konfidens 1.0
“As vibra- (1655cm-1), identified increased peak intensities for amide I tional spectroscopic techniques are label free, highly sensitive and amide III (1260cm-1), (1002cm-1) allow the rapid detection of intracellular biochemical information”
Recent advances in the vibrational spectroscopic diagnosis of non-small cell lung cancer DOI: 10.1016/j.vibspec.2019.102946. -
S eq o konfidens 1.0
“2 cm-1, Four peaks are found on the spectrum of the non-carbonized resin at 1002 cm-1, cm-1, cm-1 1038 1134 and 1158 which indicates the presence of sulfonic acid groups (Fig.”
Application of carbonized ion exchange resin beads as catalyst support for gas phase hydrogenation processes DOI: 10.1007/s11144-019-01694-7 -
Silicon (Si) konfidens 1.0
“cm-1 Similarly, bulk H 4SiW 12O 40(TSiA) exhibited bands at 1002, 980, 922 and 881 due to s(W=O t), as(W=O t), (Si-O a) and (W-O b-W), respectively [25-26].”
Promoted V2O5/TiO2 catalysts for selective catalytic reduction of NO with NH3 at low temperatures DOI: 10.1016/j.apcatb.2015.10.044 -
Hydroxyl (O-H) konfidens 1.0
“3344 3345 3500 O-H stretch in H-bonded OH/propOH [39,40] 1275 cm-1 and 1252 cm-1 (TPOZ), 1100 cm-1 (TEOS), 1128, 1107 and 1002 cm-1 (TPOZ), 2962/2905 2962/2905 2962/2905 C-H asym/sym stretch in Si-CH [36-38] 3”
Electron Beam Irradiation on the Production of a Si- and Zr-Based Hybrid Material: A Study by FTIR and WDXRF DOI: 10.3390/ma16020489
Har du et spektrum med denne bånden?
Last opp FTIR-spektrumet ditt og få en full tolkningsrapport — topptilordninger med litteraturhenvisninger, bibliotekssøk og en konfidensvurdert beviskjede — på sekunder.