What absorbs at 1002 cm⁻¹ in an FTIR spectrum?
A band near 1002 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Pikavastaus
A band near 1002 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mahdolliset funktionaalisten ryhmien määritykset
| Funktionaalinen ryhmä | Tukevat tosiasiat | Viitatut lähteet | Korkein luottamus |
|---|---|---|---|
| Silicon-oxygen (Si-O) | 5 | 5 | 1,0 |
| Silicon (Si) | 4 | 4 | 1,0 |
| Carboxyl (COOH) | 2 | 2 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Metal oxygen | 1 | 1 | 1,0 |
| S eq o | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| Anhydride | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
Sijoitus kuvastaa kertyneitä kirjallisuustodisteita, ei yhtä auktoritatiivista sääntöä. Varmista aina suhteessa näytteesi asiayhteyteen.
Mahdolliset materiaalit
| Materiaali | Tukevat huiput | Päällekkäiset ryhmät | Viitatut lähteet |
|---|---|---|---|
| PDMS | 1002, 873, 1080 | Silicon-oxygen (Si-O), Silicon (Si) | 1 |
Materiaalit näytetään vain, kun sama kirjallisuuspooli tukee tätä kaistaa ja vähintään yhtä lisäominaisuuspiikkiä.
Spektrilogiikka
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 1002 cm⁻¹ is usually not enough for material identification by itself.
Todellinen käyttö
Tällainen kysely on yleinen polymeerien tunnistuksessa, tuntemattomien muovien seulonnassa, laadunvalvonnan vianmäärityksessä, kierrätysmateriaalien varmennuksessa ja kirjallisuuteen perustuvassa piikkien määrityksen tarkastelussa.
Yleiset virheet
- Yksittäisen eristetyn piikin käsittely materiaalin todisteena tarkistamatta ainakin yhtä tai kahta tukevia piikkejä.
- Ohitetaan päällekkäisyys: useat funktionaaliset ryhmät voivat vaikuttaa lähellä samaa aaltolukua.
- Vahvistuksen ohittaminen, kun lisäaineet, seokset, hapettuminen tai kontaminaatio voivat vääristää spektriä.
Varmistusneuvo
Kun epäselvyyttä on jäljellä, vahvista hypoteesi DSC:llä, GC-MS:llä tai TGA:lla, erityisesti seoksille, hajonneille näytteille ja täytetyille polymeereille.
Näiden määritysten taustalla oleva kirjallisuus
-
Alkyl C-H luottamus 1,0
“2 759cm-1 1″-H 2′, 2″-H) confirming C-H and 2, are giving cross peaks that there is The peaks at 1002, 966, 909 and are due to wagging of”
Reactive grafting of 3-octanoylthio-1-propyltriethoxysilane in styrene butadiene rubber_ Characterization and its effect on silica reinforced tire composites DOI: 10.1016/j.polymer.2019.121693 -
Anhydride luottamus 1,0
“cm-1, At 1002 the peak shows CO-O-CO stretching, which indicates the presence of an anhydride group.”
Fatima 等 - 2021 - Extraction and Chemical Characterization of Humic DOI: 10.3390/su13168969 -
Silicon (Si) luottamus 1,0
“3: the symmetric stretching at 3057 and 3018 the ¼¼CH cm(cid:2)1 band centered at 1002 is associated with the Si-O-Si asymmetric and symmetric stretching at 2974 and 2935”
Aresta 等 - 2012 - Initiated-chemical vapor deposition of organosilic DOI: 10.1116/1.4711762 -
Silicon (Si) luottamus 1,0
“increase in their intensity in the spectra of the sample exposed to the temperature of 1000 °C and a clear shift of the maximum intensity of the main band from 1002 to 1032 cm-1, °C and a clear shift of the maximum intensity of the main ban”
Dehydroxylation of Perlite and Vermiculite: Impact on Improving the Knock-Out Properties of Moulding and Core Sand with an Inorganic Binder DOI: 10.3390/ma14112946 -
Amide luottamus 1,0
“As vibra- (1655cm-1), identified increased peak intensities for amide I tional spectroscopic techniques are label free, highly sensitive and amide III (1260cm-1), (1002cm-1) allow the rapid detection of intracellular biochemical information”
Recent advances in the vibrational spectroscopic diagnosis of non-small cell lung cancer DOI: 10.1016/j.vibspec.2019.102946. -
S eq o luottamus 1,0
“2 cm-1, Four peaks are found on the spectrum of the non-carbonized resin at 1002 cm-1, cm-1, cm-1 1038 1134 and 1158 which indicates the presence of sulfonic acid groups (Fig.”
Application of carbonized ion exchange resin beads as catalyst support for gas phase hydrogenation processes DOI: 10.1007/s11144-019-01694-7 -
Silicon (Si) luottamus 1,0
“cm-1 Similarly, bulk H 4SiW 12O 40(TSiA) exhibited bands at 1002, 980, 922 and 881 due to s(W=O t), as(W=O t), (Si-O a) and (W-O b-W), respectively [25-26].”
Promoted V2O5/TiO2 catalysts for selective catalytic reduction of NO with NH3 at low temperatures DOI: 10.1016/j.apcatb.2015.10.044 -
Hydroxyl (O-H) luottamus 1,0
“3344 3345 3500 O-H stretch in H-bonded OH/propOH [39,40] 1275 cm-1 and 1252 cm-1 (TPOZ), 1100 cm-1 (TEOS), 1128, 1107 and 1002 cm-1 (TPOZ), 2962/2905 2962/2905 2962/2905 C-H asym/sym stretch in Si-CH [36-38] 3”
Electron Beam Irradiation on the Production of a Si- and Zr-Based Hybrid Material: A Study by FTIR and WDXRF DOI: 10.3390/ma16020489
Onko sinulla spektri tällä vyöhykkeellä?
Lataa FTIR-spektrisi ja saat täydellisen tulkintaraportin — huippumääritykset kirjallisuusviitteineen, kirjastosumitukset ja luottamusluokitellun todisteketjun — sekunneissa.