What absorbs at 848 cm⁻¹ in an FTIR spectrum?
Una banda cerca de 848 cm⁻¹ puede apuntar a varios grupos funcionales. A continuación se muestran las asignaciones más probables, clasificadas por cuánta evidencia publicada respalda cada una — cada una trazable a literatura (DOI) y validada de forma cruzada con nuestros más de 130,000 espectros de referencia y grafo de conocimiento.
Backed by 8 cited sources
Quick answer
A band near 848 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Posibles asignaciones de grupos funcionales
| Grupo funcional | Hechos de respaldo | Fuentes citadas | Confianza máxima |
|---|---|---|---|
| Alkyl C-H | 4 | 4 | 1,0 |
| Aromatic ring | 2 | 2 | 1,0 |
| Metal oxygen | 2 | 2 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Chlorine | 1 | 1 | 1,0 |
| Oxygen heterocycle | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Sulfur | 1 | 1 | 1,0 |
| Carbon bromine | 1 | 1 | 0,7 |
La clasificación refleja la evidencia acumulada de la literatura, no una única regla autorizada. Siempre confirme según el contexto de su muestra.
Possible materials
| Material | Supporting peaks | Overlapping groups | Fuentes citadas |
|---|---|---|---|
| polypropylene | 848, 1030, 1600 | Alkyl C-H, Hydroxyl (O-H) | 1 |
| diamond | 848, 1378, 1332 | Alkyl C-H, Hydroxyl (O-H), Aromatic ring | 1 |
| asphalt | 848, 1600, 1376 | Alkyl C-H, Aromatic ring, Hydroxyl (O-H) | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 848 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Literatura detrás de estas asignaciones
-
confianza 1,0
“The peak at 848 corresponds to symmetric Ti-O stretching vibrations and 6”
Fabrication of the flexible nanogenerator from BTO nanopowders on graphene coated PMMA substrates by sol-gel method DOI: 10.1016/j.matchemphys.2017.02.002 -
Sulfur confianza 1,0
“Characteristic peak for sulfur detected in co-doped diamond.”
Li 等 - 2017 - Synthesis of n-type semiconductor diamond single c DOI: 10.1088/1757-899X/274/1/012131 -
Metal oxygen confianza 1,0
“Extra bands with small intensity at around 848 cm-1 and 858 are observed in BaTiO 3-xBi 2O (C1, C2, and C3) ceramics, which are ascribed to 3 the Bi-O vibration.”
Structural and radiation shielding properties of BaTiO3 ceramic with different concentrations of Bismuth and Ytterbium DOI: 10.1016/j.ceramint.2020.08.055 -
confianza 1,0
“identified at the characteristic peak of 1362.76 The intermediate products showed a sharp peak in the range of cm-1 cm-1 to 1508.45 compared to EbP which indicates that the secondary amines, the N-H stretching band is 847.77”
Tan 等 - 2018 - Synthesis and Characterization of Polybenzoxazine DOI: 10.1063/1.5066866 -
Oxygen heterocycle confianza 1,0
“The EGMA spectrum exhibits absorption bands at 997, 910 and 848 cm-1 indicating the presence of a C═O group, as associated to the epoxy group, a band at 1730 well as the characteristic bands of PE [37,44].”
A facile route to improve compatibilization of low density polyethylene/poly (-caprolactone) blends DOI: 10.1016/j.polymdegradstab.2022.110111 -
Alkyl C-H confianza 1,0
“Results and Discussion with the spectrum of DTAT, two new peaks located at 2931 cm-1 and 2840 cm-1 (C-H of -CH2-) appeared and one peak at 848 cm-1 (C-Cl) disappeared in the PETAT spectrum, showing that a reaction had occurred between DTAT”
The Effects of a Macromolecular Charring Agent with Gas Phase and Condense Phase Synergistic Flame Retardant Capability on the Properties of PP/IFR Composites DOI: 10.3390/ma11010111 -
Alkyl C-H confianza 1,0
“S=O 1024 stretching vibration 964 Trans-C-H wagging vibration (butadiene block) 940 C-H deformation vibration of ring hydrogens 848”
Effect of Phenolic Resin on the Rheological and Morphological Characteristics of Styrene-Butadiene Rubber-Modified Asphalt DOI: 10.3390/ma13245836 -
Aromatic ring confianza 1,0
“cm-1 Additionally, the relatively intense band at 848 in sample D13 could also be assigned cm-1 to aromatic C-H vibrations.”
Identification of Colourants and Varnishes in a 14th Century Decorated Wood-Carved Door of the Dionysiou Monastery in Mount Athos DOI: 10.3390/coatings11091087
¿Tiene un espectro con esta banda?
Cargue su espectro FTIR y obtenga un informe de interpretación completo — asignaciones de picos con citas bibliográficas, coincidencias de librerías y una cadena de evidencia con calificación de confianza — en segundos.