Was absorbiert bei 848 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 848 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 848 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 4 | 4 | 1,0 |
| Aromatic ring | 2 | 2 | 1,0 |
| Metal oxygen | 2 | 2 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Chlorine | 1 | 1 | 1,0 |
| Oxygen heterocycle | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Sulfur | 1 | 1 | 1,0 |
| Carbon bromine | 1 | 1 | 0,7 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| polypropylene | 848, 1030, 1600 | Alkyl C-H, Hydroxyl (O-H) | 1 |
| diamond | 848, 1378, 1332 | Alkyl C-H, Hydroxyl (O-H), Aromatic ring | 1 |
| asphalt | 848, 1600, 1376 | Alkyl C-H, Aromatic ring, Hydroxyl (O-H) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 848 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Vertrauen 1,0
“The peak at 848 corresponds to symmetric Ti-O stretching vibrations and 6”
Fabrication of the flexible nanogenerator from BTO nanopowders on graphene coated PMMA substrates by sol-gel method DOI: 10.1016/j.matchemphys.2017.02.002 -
Sulfur Vertrauen 1,0
“Characteristic peak for sulfur detected in co-doped diamond.”
Li 等 - 2017 - Synthesis of n-type semiconductor diamond single c DOI: 10.1088/1757-899X/274/1/012131 -
Metal oxygen Vertrauen 1,0
“Extra bands with small intensity at around 848 cm-1 and 858 are observed in BaTiO 3-xBi 2O (C1, C2, and C3) ceramics, which are ascribed to 3 the Bi-O vibration.”
Structural and radiation shielding properties of BaTiO3 ceramic with different concentrations of Bismuth and Ytterbium DOI: 10.1016/j.ceramint.2020.08.055 -
Vertrauen 1,0
“identified at the characteristic peak of 1362.76 The intermediate products showed a sharp peak in the range of cm-1 cm-1 to 1508.45 compared to EbP which indicates that the secondary amines, the N-H stretching band is 847.77”
Tan 等 - 2018 - Synthesis and Characterization of Polybenzoxazine DOI: 10.1063/1.5066866 -
Oxygen heterocycle Vertrauen 1,0
“The EGMA spectrum exhibits absorption bands at 997, 910 and 848 cm-1 indicating the presence of a C═O group, as associated to the epoxy group, a band at 1730 well as the characteristic bands of PE [37,44].”
A facile route to improve compatibilization of low density polyethylene/poly (-caprolactone) blends DOI: 10.1016/j.polymdegradstab.2022.110111 -
Alkyl C-H Vertrauen 1,0
“Results and Discussion with the spectrum of DTAT, two new peaks located at 2931 cm-1 and 2840 cm-1 (C-H of -CH2-) appeared and one peak at 848 cm-1 (C-Cl) disappeared in the PETAT spectrum, showing that a reaction had occurred between DTAT”
The Effects of a Macromolecular Charring Agent with Gas Phase and Condense Phase Synergistic Flame Retardant Capability on the Properties of PP/IFR Composites DOI: 10.3390/ma11010111 -
Alkyl C-H Vertrauen 1,0
“S=O 1024 stretching vibration 964 Trans-C-H wagging vibration (butadiene block) 940 C-H deformation vibration of ring hydrogens 848”
Effect of Phenolic Resin on the Rheological and Morphological Characteristics of Styrene-Butadiene Rubber-Modified Asphalt DOI: 10.3390/ma13245836 -
Aromatic ring Vertrauen 1,0
“cm-1 Additionally, the relatively intense band at 848 in sample D13 could also be assigned cm-1 to aromatic C-H vibrations.”
Identification of Colourants and Varnishes in a 14th Century Decorated Wood-Carved Door of the Dionysiou Monastery in Mount Athos DOI: 10.3390/coatings11091087
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.