What absorbs at 819 cm⁻¹ in an FTIR spectrum?
A band near 819 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 6 cited sources
Quick answer
A band near 819 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mogelijke functionele-groeptoewijzingen
| Functionele groep | Ondersteunende feiten | Geciteerde bronnen | Hoogste vertrouwen |
|---|---|---|---|
| Aromatic ring | 3 | 2 | 1,0 |
| Alkyl C-H | 2 | 1 | 1,0 |
| Silicon carbon | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Chlorine | 1 | 1 | 1,0 |
Ranglijst weerspiegelt cumulatief literatuurbewijs, niet één gezaghebbende regel. Bevestig altijd aan de hand van uw monsterecontext.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 819 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Literatuur achter deze toewijzingen
-
vertrouwen 1,0
“Additionally, the peak observed at 819 shows the presence of C-Cl bond.”
Quaternarization and polymerization of 2-chloroethyl maleate derivative of epoxidized soybean oil DOI: 10.55730/1300-0527.3503 -
Alkyl C-H vertrouwen 1,0
“The absorption bands at 2924 and 1499 were generated by stretching of C-H and C=C cm-1 in the benzene ring, respectively, whereas the band at 819 was due to the symmetrical elongation of”
Preparation and Evaluation of a Polyimide-Coated Ultrafine Gilt Molybdenum Wire and Its Knitted Mesh Used for Electromagnetic Reflectors DOI: 10.3390/polym9120734 -
Acetate vertrouwen 1,0
“cm-1 C-O stretching, while the peak at ~819 can be attributed to C-O-C in plan symmetric bending [55-58].”
Excellent Fire Retardant Properties of CNF/VMT Based LBL Coatings Deposited on Polypropylene and Wood-Ply DOI: 10.3390/polym13020303 -
Silicon carbon vertrouwen 1,0
“LLM confirmed rule peak-group candidate”
Wang 等 - 2015 - A facile method to fabricate Al4B2O9 whiskers on p DOI: 10.1007/s40145-015-0154-0 -
Aromatic ring vertrouwen 0,95
“Text: 'the out-of-plane bending of the benzene ring (819 cm-1)'”
Jevremovic 等 - 2014 - Investigation of the effect of acid dopant on the DOI: 10.1016/j.cap.2014.06.018 -
vertrouwen 0,9
“Text states: 'peak at 819 cm-1 was attributed to a plasmon related peak'.”
Optical properties of InAs/InP quantum dot stack grown by metalorganic chemical vapor deposition DOI: 10.1002/pssc.200303088
Heeft u een spectrum met deze band?
Upload uw FTIR-spectrum en ontvang binnen enkele seconden een volledig interpretatierapport — piektoewijzingen met literatuurverwijzingen, bibliotheekovereenkomsten en een met vertrouwen beoordeelde bewijsketen.