Was absorbiert bei 723 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 723 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 723 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 13 | 13 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Metal oxygen | 1 | 1 | 1,0 |
| Lipid | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| polypropylene | 723, 1030, 1600 | Alkyl C-H, Hydroxyl (O-H) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 723 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Alkyl C-H Vertrauen 1,0
“cm-1 vibrations CH and CH bands were clearly seen in the region of 1465 while the band at 723 2 3 was assigned to a CH [25,26].”
Monitoring Enzymatic Hydroesterification of Low-Cost Feedstocks by Fourier Transform InfraRed Spectroscopy DOI: 10.3390/catal9060535 -
Hydroxyl (O-H) Vertrauen 1,0
“Sample S076 consists only of trans-vacant (tv) layers because its DTG curve and IR spectrum contain cm-1, a single dehydroxylation maximum at T = 723 °C and an OH stretching band 3675 respectively.”
Drits 等 - 2011 - New insight into the structural transformation of DOI: 10.2138/am.2011.3605 -
Acetate Vertrauen 1,0
“gion includes shoulder peak at 1,238 and a sharp peak at 1,157 representing stretching vibration of C-O ester groups and peak at cm-1 723 associated with out-of-plane vibration of cis -HC=CHgroup”
Chemical, thermal, rheological and FTIR studies of vegetable oils and their effect on eggless muffin characteristics DOI: 10.1111/jfpp.13978 -
Alkyl C-H Vertrauen 1,0
“cm-1 cm-1, 1656 are vibrating peaks of cis (C=C) and cis (C-H) AND and CDB have spectral similarities at 723 cm-1 groups of USFA acids.”
Martins 等 - 2019 - Approach by Raman and infrared spectroscopy in thr DOI: 10.31349/RevMexFis.65.328 -
Alkyl C-H Vertrauen 1,0
“FTIR spectrum cm-1 (C-H) common for these types of compounds, and belong to also shows absorption bands at 723 for group the methylene carbon atoms of MEOA and HYOOA vibration.”
Salimon 等 - 2013 - Synthesis and optimization ring opening of monoepo DOI: 10.1186/2193-1801-2-429 -
Alkyl C-H Vertrauen 1,0
“inner layer had the highest peak for the C-H bond, with bands at 723 and 2823 The symmetry deformation of CH on aliphatic hydrocarbons was assigned to the peak 3”
Physical and Chemical Characteristics of Agricultural-Plastic Wastes for Feasibility of Solid Fuel Briquette Production DOI: 10.3390/su142315751 -
Alkyl C-H Vertrauen 1,0
“In addition, lower absorption with limited variations was cm-1 observed in absorption between 1460 and 400 (Figure 3), with a rather distinct one cm-1, cis in the band of 723 that responds to (C-H) out-of-plane deformation [27,28].”
Banou 等 - 2023 - Oil Media on Paper Investigating the Interaction DOI: 10.3390/polym15112567 -
Alkyl C-H Vertrauen 1,0
“The peaks at 1375, 1467, and 1439 were assigned to symmetric and asymmetric vibrations of methyl groups and the peak at cm-1 723 was ascribed to rocking vibration and deformation vibration of the -CH”
Effects of processing conditions on the properties of paraffin/melamine-urea-formaldehyde microcapsules prepared by in situ polymerization DOI: 10.1016/j.rser.2017.10.002.
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.