What absorbs at 706 cm⁻¹ in an FTIR spectrum?
A band near 706 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Răspuns rapid
A band near 706 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Atribuiri posibile ale grupelor funcționale
| Grup funcțional | Fapte suport | Surse citate | Încredere maximă |
|---|---|---|---|
| Metal oxygen | 3 | 3 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| Borate | 1 | 1 | 1,0 |
| Carbonate | 1 | 1 | 0,9 |
| Boron nitrogen | 1 | 0 | 0,9 |
Clasamentul reflectă dovezile acumulate din literatură, nu o singură regulă autoritară. Confirmați întotdeauna în contextul mostrei dvs.
Materiale posibile
| Material | Vârfuri suport | Grupuri suprapuse | Surse citate |
|---|---|---|---|
| AuNPs | 706, 1646, 1721 | Amide, Methacrylate | 1 |
| nanocomposite | 706, 2921, 3300 | Methacrylate, Metal oxygen | 1 |
| cellulose | 706, 1735, 1650 | Methacrylate, Amide | 1 |
| biochar | 706, 1640, 1115 | Methacrylate | 1 |
| wood | 706, 1740, 1730 | Methacrylate | 1 |
| calcite | 706, 2850, 2864 | Methacrylate, Amide | 1 |
Materialele sunt afișate numai atunci când același grup de literatură susține această bandă și cel puțin un vârf caracteristic suplimentar.
Logica spectrului
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 706 cm⁻¹ is usually not enough for material identification by itself.
Utilizare în condiții reale
Acest tip de interogare este comun în identificarea polimerilor, screeningul materialelor plastice necunoscute, depanarea QC, verificarea materialelor reciclate și revizuirea atribuirii vârfurilor bazată pe literatură.
Greșeli comune
- Tratarea unei benzi izolate ca dovadă a unui material fără a verifica cel puțin unul sau două vârfuri de susținere.
- Ignorând suprapunerea: mai multe grupuri funcționale pot contribui în apropierea aceluiași număr de undă.
- Omiterea validării atunci când aditivii, amestecurile, oxidarea sau contaminarea pot distorsiona spectrul.
Sfat de verificare
Când ambiguitatea rămâne, validați ipoteza prin DSC, GC-MS sau TGA, în special pentru amestecuri, probe degradate și polimeri umpluți.
Literatura din spatele acestor atribuiri
-
încredere 1,0
“The FT-IR cm-1 spectrum showed a broad peak at 706 due to Ti-O”
Anjum 等 - 2023 - Photocatalytic degradation of reactive violet 1 by DOI: 10.30955/gnj.004281 -
Borate încredere 1,0
“The absorption band [8], 706cm-1 is assigned to B-O-B bending vibration, the at (cid:5) Bexp(cid:4) cm-1 is due to the stretching band between 1100 and 800 hν , α (ν) = 4]- [BO (3) tetrahedral borons and broad absorption modes of (cid:2)E c”
Kolavekar 等 - 2017 - Characterization and optical properties of Pr2O3-d DOI: 10.1007/s12034-017-1400-6 -
Amide încredere 1,0
“FTIR spectra of CNF/AuNPs/anti-colistin Ab, and exhibited Validation study cm-1, cm-1, cm-1 transmittance peaks at 706 1246 and 1514 corresponding to amide IV, due to presence of OCN banding;”
Kumar 等 - 2022 - Electrochemical immunosensor for the detection of DOI: 10.1007/s13205-022-03252-w -
Alkyl C-H încredere 1,0
“The peak at 706 is assigned to alkyl bendbiochars from unmixed substrates at 650 °C are more stabi-”
Biochar from co-pyrolysis of urban organic wastes—investigation of carbon sink potential using ATR-FTIR and TGA DOI: 10.1007/s13399-020-01000-9 -
Silicon (Si) încredere 1,0
“cm-1 symmetric stretching vibrations of inner Si/Al-O structure, respectively), 1180 and ZY characteristic peaks were found at 1050 cm-1 and 706 cm-1 (asymmetric and sym4 cm-1 788 (asymmetric and symmetric stretching vibrations of external”
Novel Biocomposite Films Based on High Methoxyl Pectin Reinforced with Zeolite Y for Food Packaging Applications DOI: 10.3390/foods11030360 -
Acetate încredere 1,0
“The band at 1,706 cm-1 is ascribed to the stretching vibration C=O, wavenumber of 3460 [47,48].”
Xu 等 - 2019 - New Perspective on Wood Thermal Modification Rele DOI: 10.3390/polym11071145 -
Metal oxygen încredere 0,9
“attributed to Ag-O stretching vibration”
Al-Qahtani 等 - 2022 - Structural, morphological, optical and electrochem DOI: 10.15251/JOR.2022.182.187 -
Carbonate încredere 0,9
“V4 mode of calcite”
Loy 等 - 2016 - Effects of Calcination on the Crystallography and DOI: 10.1155/2016/2914368
Aveți un spectru cu această bandă?
Încărcați spectrul FTIR și obțineți un raport complet de interpretare — atribuiri de peak-uri cu citări din literatură, potriviri cu biblioteca și un lanț de dovezi cu nivel de încredere — în câteva secunde.