What absorbs at 706 cm⁻¹ in an FTIR spectrum?
Una banda cerca de 706 cm⁻¹ puede apuntar a varios grupos funcionales. A continuación se muestran las asignaciones más probables, clasificadas por cuánta evidencia publicada respalda cada una — cada una trazable a literatura (DOI) y validada de forma cruzada con nuestros más de 130,000 espectros de referencia y grafo de conocimiento.
Backed by 8 cited sources
Respuesta rápida
A band near 706 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Posibles asignaciones de grupos funcionales
| Grupo funcional | Hechos de respaldo | Fuentes citadas | Confianza máxima |
|---|---|---|---|
| Metal oxygen | 3 | 3 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| Borate | 1 | 1 | 1,0 |
| Carbonate | 1 | 1 | 0,9 |
| Boron nitrogen | 1 | 0 | 0,9 |
La clasificación refleja la evidencia acumulada de la literatura, no una única regla autorizada. Siempre confirme según el contexto de su muestra.
Materiales posibles
| Material | Picos de apoyo | Grupos superpuestos | Fuentes citadas |
|---|---|---|---|
| AuNPs | 706, 1646, 1721 | Amide, Methacrylate | 1 |
| nanocomposite | 706, 2921, 3300 | Methacrylate, Metal oxygen | 1 |
| cellulose | 706, 1735, 1650 | Methacrylate, Amide | 1 |
| biochar | 706, 1640, 1115 | Methacrylate | 1 |
| wood | 706, 1740, 1730 | Methacrylate | 1 |
| calcite | 706, 2850, 2864 | Methacrylate, Amide | 1 |
Los materiales se muestran solo cuando el mismo grupo de literatura respalda esta banda y al menos un pico característico adicional.
Lógica de espectro
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 706 cm⁻¹ is usually not enough for material identification by itself.
Uso en el mundo real
Este tipo de consulta es común en la identificación de polímeros, cribado de plásticos desconocidos, resolución de problemas de control de calidad, verificación de materiales reciclados y revisión de asignación de picos respaldada por la literatura.
Errores comunes
- Tratar una banda aislada como prueba de un material sin verificar al menos uno o dos picos de apoyo.
- Ignorando superposición: múltiples grupos funcionales pueden contribuir cerca del mismo número de onda.
- Omitir la validación cuando los aditivos, las mezclas, la oxidación o la contaminación puedan distorsionar el espectro.
Consejo de verificación
Cuando persista la ambigüedad, valide la hipótesis con DSC, GC-MS o TGA, especialmente para mezclas, muestras degradadas y polímeros rellenos.
Literatura detrás de estas asignaciones
-
confianza 1,0
“The FT-IR cm-1 spectrum showed a broad peak at 706 due to Ti-O”
Anjum 等 - 2023 - Photocatalytic degradation of reactive violet 1 by DOI: 10.30955/gnj.004281 -
Borate confianza 1,0
“The absorption band [8], 706cm-1 is assigned to B-O-B bending vibration, the at (cid:5) Bexp(cid:4) cm-1 is due to the stretching band between 1100 and 800 hν , α (ν) = 4]- [BO (3) tetrahedral borons and broad absorption modes of (cid:2)E c”
Kolavekar 等 - 2017 - Characterization and optical properties of Pr2O3-d DOI: 10.1007/s12034-017-1400-6 -
Amide confianza 1,0
“FTIR spectra of CNF/AuNPs/anti-colistin Ab, and exhibited Validation study cm-1, cm-1, cm-1 transmittance peaks at 706 1246 and 1514 corresponding to amide IV, due to presence of OCN banding;”
Kumar 等 - 2022 - Electrochemical immunosensor for the detection of DOI: 10.1007/s13205-022-03252-w -
Alkyl C-H confianza 1,0
“The peak at 706 is assigned to alkyl bendbiochars from unmixed substrates at 650 °C are more stabi-”
Biochar from co-pyrolysis of urban organic wastes—investigation of carbon sink potential using ATR-FTIR and TGA DOI: 10.1007/s13399-020-01000-9 -
Silicon (Si) confianza 1,0
“cm-1 symmetric stretching vibrations of inner Si/Al-O structure, respectively), 1180 and ZY characteristic peaks were found at 1050 cm-1 and 706 cm-1 (asymmetric and sym4 cm-1 788 (asymmetric and symmetric stretching vibrations of external”
Novel Biocomposite Films Based on High Methoxyl Pectin Reinforced with Zeolite Y for Food Packaging Applications DOI: 10.3390/foods11030360 -
Acetate confianza 1,0
“The band at 1,706 cm-1 is ascribed to the stretching vibration C=O, wavenumber of 3460 [47,48].”
Xu 等 - 2019 - New Perspective on Wood Thermal Modification Rele DOI: 10.3390/polym11071145 -
Metal oxygen confianza 0,9
“attributed to Ag-O stretching vibration”
Al-Qahtani 等 - 2022 - Structural, morphological, optical and electrochem DOI: 10.15251/JOR.2022.182.187 -
Carbonate confianza 0,9
“V4 mode of calcite”
Loy 等 - 2016 - Effects of Calcination on the Crystallography and DOI: 10.1155/2016/2914368
¿Tiene un espectro con esta banda?
Cargue su espectro FTIR y obtenga un informe de interpretación completo — asignaciones de picos con citas bibliográficas, coincidencias de librerías y una cadena de evidencia con calificación de confianza — en segundos.