Was absorbiert bei 612 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 612 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 612 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Metal oxygen | 6 | 6 | 1,0 |
| Silicon (Si) | 2 | 2 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| Silicon silicon | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| S s | 1 | 1 | 1,0 |
| C-S single bond | 1 | 1 | 1,0 |
| Sulfate (SO4) | 1 | 1 | 1,0 |
| Sulfonyl | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| silica | 612, 1100, 1080 | Silicon (Si), Alkyl C-H | 1 |
| CaCO3 | 612, 1141, 712 | Alkyl C-H, Silicon (Si) | 1 |
| alumina | 612, 460, 1000 | Metal oxygen, Alkyl C-H | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 612 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Sulfonyl Vertrauen 1,0
“The FTIR results for all SRHCs further proved the 611 cm-1 presence of -SO 3H group on the catalysts by the appearance of peak at 1035 which 612 corresponded to O=S=O stretching of -SO 3H group.”
Balan 等 - 2021 - Esterification of residual palm oil using solid ac DOI: 10.1016/j.jtice.2012.07.001. -
Silicon (Si) Vertrauen 1,0
“at wavenumbers of 612 668 and 951 cm-1 C max, of the In accumulation, the maximum capacitance, The peak at 612 is assigned to the characteristic vifilm can be obtained directly, and the dielectric constant of bration mode of Si (100) substr”
Fu 等 - 2012 - Structural, optical and electrical properties of c DOI: 10.1007/s00339-011-6713-5 -
Metal oxygen Vertrauen 1,0
“1036 1386 1630 2922 and 3450 cm-1 The absorption band at 460 has appeared due to the Ga-O cm-1.49,50 stretching mode and due to Mg-O stretching mode at 612 0.5mol%Cr3+,2mol%Si4+ Figure3.”
Mondal 和 Manam - 2017 - Structural and Luminescent Properties of Si4+ Co-D DOI: 10.1149/2.0021708jss -
Metal oxygen Vertrauen 1,0
“cm-1 and 612.36 the strong band around 612 is characteristic of the aurivillius family, it may be assigned to the vibrations of nb-o bonds.”
Structure and Dielectric Properties of V and Y Disorder Doped SrBi2Nb2O9 Ceramics DOI: 10.24425/amm.2022.141073 -
Vertrauen 1,0
“The IR spectra show broad transmission bands centered at cm-1 bands centered at 550 and 612 typical for Ni-O stretching vibrations [27].”
Effect of Modified Alumina Support on the Performance of Ni-Based Catalysts for CO2 Reforming of Methane DOI: 10.3390/catal12091066 -
Sulfate (SO4) Vertrauen 1,0
“in winter and summer are shown in In the two study attributed to the increase in both fossil fuels and biomass cm-1and period, the absorption bands between 612 and 615 burning, which was from the high energy demands by cm-1was attributed to”
Askar 等 - 2022 - Chemical Composition, Optical Properties and Sourc DOI: 10.3389/fenvs.2022.929449 -
C-S single bond Vertrauen 1,0
“cm-1), cm-1) The sharp and intense diffraction peak observed around and 2836 C-S (741, 709, 670, 638 and 612 cm-1) 2q = 15° for crystalline GeS 2, Figure 7a, (referred to and S-S (473 vibration groups.”
De Salvi 等 - 2015 - New Flexible and Transparent Solution-Based German DOI: 10.5935/0103-5053.20150065 -
Metal oxygen Vertrauen 1,0
“The new peaks at 612 and cm(cid:16)1 were associated with the metal-oxygen bonds 464 (Gd-O and Gd-O-Ga) vibrations.”
Dong 等 - 2012 - Preparation and properties of Nd,YbGGG polycrysta DOI: 10.1007/s40145-012-0030-0
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.