What absorbs at 515 cm⁻¹ in an FTIR spectrum?
Una banda cerca de 515 cm⁻¹ puede apuntar a varios grupos funcionales. A continuación se muestran las asignaciones más probables, clasificadas por cuánta evidencia publicada respalda cada una — cada una trazable a literatura (DOI) y validada de forma cruzada con nuestros más de 130,000 espectros de referencia y grafo de conocimiento.
Backed by 8 cited sources
Respuesta rápida
A band near 515 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Posibles asignaciones de grupos funcionales
| Grupo funcional | Hechos de respaldo | Fuentes citadas | Confianza máxima |
|---|---|---|---|
| Metal oxygen | 5 | 5 | 1,0 |
| S s | 2 | 2 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Carbon bromine | 1 | 1 | 0,9 |
La clasificación refleja la evidencia acumulada de la literatura, no una única regla autorizada. Siempre confirme según el contexto de su muestra.
Materiales posibles
| Material | Picos de apoyo | Grupos superpuestos | Fuentes citadas |
|---|---|---|---|
| ZnO | 515, 1400, 3430 | Metal oxygen | 1 |
| CuO | 515, 453, 1000 | Metal oxygen | 1 |
Los materiales se muestran solo cuando el mismo grupo de literatura respalda esta banda y al menos un pico característico adicional.
Lógica de espectro
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 515 cm⁻¹ is usually not enough for material identification by itself.
Uso en el mundo real
Este tipo de consulta es común en la identificación de polímeros, cribado de plásticos desconocidos, resolución de problemas de control de calidad, verificación de materiales reciclados y revisión de asignación de picos respaldada por la literatura.
Errores comunes
- Tratar una banda aislada como prueba de un material sin verificar al menos uno o dos picos de apoyo.
- Ignorando superposición: múltiples grupos funcionales pueden contribuir cerca del mismo número de onda.
- Omitir la validación cuando los aditivos, las mezclas, la oxidación o la contaminación puedan distorsionar el espectro.
Consejo de verificación
Cuando persista la ambigüedad, valide la hipótesis con DSC, GC-MS o TGA, especialmente para mezclas, muestras degradadas y polímeros rellenos.
Literatura detrás de estas asignaciones
-
Acetate confianza 1,0
“The additional peaks at 1,640 3), cm-1 cm-1(C═O cm-1 (-C-H-CH 2,850 2), 1,746 ester), and observed in spread samples, and at about 1,515 cm-1 (C-O-CH (C-H 1,160 2) and few bands related to observed in butter samples, were ignored as they we”
Contreras 等 - 2010 - Evaluation of Nano Zinc (ZnO) for Surface Enhancem DOI: 10.1007/s11947-009-0237-4 -
Metal oxygen confianza 1,0
“The oxygen func147cm-1 (Eg) due to symmetric stretching vibration mode and other tionality groups attached at the surface of graphitic sheets reduced by 399cm-1 515cm-1 637cm-1 weaker bands at (B1g), (A1g), (Eg) corhydrothermal synthesis of”
Effect of co-sensitization in solar exfoliated TiO2 functionalized rGO photoanode for dye-sensitized solar cell applications DOI: 10.1016/j.mssp.2019.02.027 -
Silicon (Si) confianza 1,0
“An increase of T from 400 °C to 800 °C is seen to lead to anatase phase in the Ti 0.5Si 0.5O films fired at 600 is f 2 Si-O-Si a significant increase of the peak to the detriment of confirmed by the appearance of the peaks at 144, 395, 515”
Sarkar 等 - 2007 - Dielectric properties of sol-gel derived high-k ti DOI: 10.1016/j.tsf.2006.11.155 -
S s confianza 1,0
“The intensity of the relative intensity of the band at 540 The redistribution of the relative intensities of spectral compocm-1 intheRamanspectrumoftheDTT-CTsample bandat515 cm-1 nentsinthefrequencyintervalof300to370 isobservedin increases”
Brandt 等 - 2015 - Effect of thermal denaturation, inhibition, and cl DOI: 10.1117/1.JBO.20.5.051015 -
S s confianza 1,0
“The band cm-1 at 515 arising from the S-S stretching vibrational mode of a disulfide bond lower its intensity.”
Antibody CD133 Biofunctionalization of Ammonium Acryloyldimethyltaurate and Vinylpyrrolidone Co-Polymer-Based Coating of the Vascular Implants DOI: 10.3390/ma13245634 -
confianza 1,0
“The absorption band maximum at 515 cm-1 most likely corresponds to the Ti-O-Ti bond [40,41].”
Synthesis and Investigation of Zeolite TiO2/Al-ZSM-12 Structure and Properties DOI: 10.3390/catal13020216 -
Phosphate (PO4) confianza 1,0
“11(b) shows that after SP treatment, the peaks located at 546, 529, and 515 cm-1 attributed to the asymmetric and symmetric stretching vibrations of P-O-C appeared.”
Zou 等 - 2022 - Dispersion of sodium phytate on muscovite and the DOI: 10.37190/ppmp/154951 -
Metal oxygen confianza 0,9
“Indication for CuO.”
Effect of CuO and Graphene on PTFE Microfibers: Experimental and Modeling Approaches DOI: 10.3390/polym14061069
¿Tiene un espectro con esta banda?
Cargue su espectro FTIR y obtenga un informe de interpretación completo — asignaciones de picos con citas bibliográficas, coincidencias de librerías y una cadena de evidencia con calificación de confianza — en segundos.