What absorbs at 503 cm⁻¹ in an FTIR spectrum?
A band near 503 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 7 cited sources
Réponse rapide
A band near 503 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Attributions possibles de groupes fonctionnels
| Groupe fonctionnel | Faits à l＇appui | Sources citées | Confiance maximale |
|---|---|---|---|
| Carboxyl (COOH) | 2 | 2 | 1,0 |
| Alkyl C-H | 2 | 2 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 0,9 |
Le classement reflète les preuves bibliographiques accumulées, et non une règle faisant autorité. Confirmez toujours dans le contexte de votre échantillon.
Matériaux possibles
| Matériel | Pics de support | Groupes chevauchants | Sources citées |
|---|---|---|---|
| polyaniline | 503, 1565, 1570 | Alkyl C-H, Methacrylate | 1 |
| nanocomposites | 503, 1717, 1630 | Alkyl C-H, Methacrylate | 1 |
| titanium dioxide | 503, 1716, 1724 | Alkyl C-H, Methacrylate | 1 |
Les matériaux sont affichés uniquement lorsque le même ensemble de littérature soutient cette bande et au moins un pic caractéristique supplémentaire.
Logique du spectre
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 503 cm⁻¹ is usually not enough for material identification by itself.
Utilisation réelle
Ce type de requête est courant dans l＇identification des polymères, le criblage des plastiques inconnus, le dépannage du contrôle qualité, la vérification des matériaux recyclés et l＇examen de l＇attribution des pics appuyée par la littérature.
Erreurs courantes
- Traiter une bande isolée comme preuve d＇un matériau sans vérifier au moins un ou deux pics de support.
- Ignorer le chevauchement : plusieurs groupes fonctionnels peuvent contribuer près du même nombre d＇onde.
- Sauter la validation lorsque des additifs, des mélanges, l＇oxydation ou la contamination peuvent déformer le spectre.
Conseil de vérification
Lorsque l＇ambiguïté persiste, validez l＇hypothèse avec DSC, GC-MS ou TGA, en particulier pour les mélanges, les échantillons dégradés et les polymères chargés.
Bibliographie derrière ces attributions
-
Alkyl C-H confiance 1,0
“The band at 803 represented the stretching of C-H at 503 cm-1 was seen to be attributed to condensed octahedral AlO6 [18].”
Bekhoukh 等 - 2021 - Development, Investigation, and Comparative Study DOI: 10.3390/polym13193344 -
Acetate confiance 1,0
“Changes in C=O bands 503 in IR spectra were affected when the OM was heated with minerals.”
Hirakawa 等 - 2021 - Effects of minerals on metamorphism of organic mat DOI: 10.1016/0016-7037(89)90180-4 -
Water (H2O) confiance 1,0
“Increase in absorbability (A) and water absorption (WA), 503 synchronized with the increase in the viscosity of the mixture, the gas escapes to the outside.”
Liszkowska 等 - 2019 - The Effect of Accelerated Aging Conditions on the DOI: 10.3390/app9132663 -
Alkyl C-H confiance 1,0
“The small absorption peaks at 765.74, 698.23 and togram of condition (iv), exhibited peaks at retention time cm-1 503.42 12.4, 15.87 and 22.8 min which indicated that addition of were corresponding to CH deformations as well nanoparticles a”
Enhanced degradation of indeno(1,2,3-cd)pyrene using Candida tropicalis NN4 in presence of iron nanoparticles and produced biosurfactant: a statistical approach DOI: 10.1007/s13205-019-1623-x -
Carboxyl (COOH) confiance 1,0
“LLM confirmed rule peak-group candidate”
Priya 和 Azhagan - 2023 - Influence of succinic acid species on structural, DOI: 10.15251/DJNB.2023.181.55 -
Silicon-oxygen (Si-O) confiance 0,9
“Assigned to SiO4 vibration.”
Characterization of a calcium phospho-silicated apatite with iron oxide inclusions DOI: 10.1016/j.jcrysgro.2010.12.054 -
confiance 0,9
“Explicitly attributed to C-O-S coupled vibrations.”
Flotation Performance, Structure-Activity Relationship and Adsorption Mechanism of O-Isopropyl-N-Ethyl Thionocarbamate Collector for Elemental Sulfur in a High-Sulfur Residue DOI: 10.3390/met
Avez-vous un spectre avec cette bande ?
Téléchargez votre spectre FTIR et obtenez un rapport d＇interprétation complet — attributions de pics avec citations bibliographiques, correspondances de bibliothèque et une chaîne de preuves avec évaluation de la confiance — en quelques secondes.