What absorbs at 503 cm⁻¹ in an FTIR spectrum?
A band near 503 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 7 cited sources
Schnelle Antwort
A band near 503 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Carboxyl (COOH) | 2 | 2 | 1,0 |
| Alkyl C-H | 2 | 2 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 0,9 |
Das Ranking spiegelt die gesammelte Literatur Evidenz wider, nicht eine einzelne maßgebliche Regel. Bestätigen Sie immer anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| polyaniline | 503, 1565, 1570 | Alkyl C-H, Methacrylate | 1 |
| nanocomposites | 503, 1717, 1630 | Alkyl C-H, Methacrylate | 1 |
| titanium dioxide | 503, 1716, 1724 | Alkyl C-H, Methacrylate | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 503 cm⁻¹ is usually not enough for material identification by itself.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Alkyl C-H Vertrauen 1,0
“The band at 803 represented the stretching of C-H at 503 cm-1 was seen to be attributed to condensed octahedral AlO6 [18].”
Bekhoukh 等 - 2021 - Development, Investigation, and Comparative Study DOI: 10.3390/polym13193344 -
Acetate Vertrauen 1,0
“Changes in C=O bands 503 in IR spectra were affected when the OM was heated with minerals.”
Hirakawa 等 - 2021 - Effects of minerals on metamorphism of organic mat DOI: 10.1016/0016-7037(89)90180-4 -
Water (H2O) Vertrauen 1,0
“Increase in absorbability (A) and water absorption (WA), 503 synchronized with the increase in the viscosity of the mixture, the gas escapes to the outside.”
Liszkowska 等 - 2019 - The Effect of Accelerated Aging Conditions on the DOI: 10.3390/app9132663 -
Alkyl C-H Vertrauen 1,0
“The small absorption peaks at 765.74, 698.23 and togram of condition (iv), exhibited peaks at retention time cm-1 503.42 12.4, 15.87 and 22.8 min which indicated that addition of were corresponding to CH deformations as well nanoparticles a”
Enhanced degradation of indeno(1,2,3-cd)pyrene using Candida tropicalis NN4 in presence of iron nanoparticles and produced biosurfactant: a statistical approach DOI: 10.1007/s13205-019-1623-x -
Carboxyl (COOH) Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Priya 和 Azhagan - 2023 - Influence of succinic acid species on structural, DOI: 10.15251/DJNB.2023.181.55 -
Silicon-oxygen (Si-O) Vertrauen 0,9
“Assigned to SiO4 vibration.”
Characterization of a calcium phospho-silicated apatite with iron oxide inclusions DOI: 10.1016/j.jcrysgro.2010.12.054 -
Vertrauen 0,9
“Explicitly attributed to C-O-S coupled vibrations.”
Flotation Performance, Structure-Activity Relationship and Adsorption Mechanism of O-Isopropyl-N-Ethyl Thionocarbamate Collector for Elemental Sulfur in a High-Sulfur Residue DOI: 10.3390/met
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekunden einen vollständigen Interpretationsbericht – Peakzuweisungen mit Literaturzitaten, Bibliotheksübereinstimmungen und einer vertrauensbewerteten Evidenzkette.