Was absorbiert bei 3070 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 3070 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 3070 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 8 | 6 | 1,0 |
| Hydroxyl (O-H) | 5 | 4 | 1,0 |
| Alkene (C=C) | 4 | 4 | 1,0 |
| N h | 3 | 2 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Aromatic ring | 2 | 1 | 1,0 |
| Nitrogen heterocycle | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 0 | 1,0 |
| Methacrylate | 1 | 0 | 1,0 |
| C-O single bond | 1 | 0 | 1,0 |
| Acetate | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 3070 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Alkene (C=C) Vertrauen 1,0
“The participation of the double bonds in the formation of Michael addition product was clearly evident from the disappearance of typical alkene bands at 3070, 3040, cm-1 1637.5, 1620.8, 1464, 984.4, and 910.6 in the C-H products (Figure 1(C”
Goswami 等 - 2004 - One-pot synthesis of a novel water-soluble fullere DOI: 10.1021/cm0350232 -
Alkyl C-H Vertrauen 1,0
“Furthermore, at 0.05 mol fraction, the spectra show a cm-1 cm-1 peaks at 2880 and 2945 are attributed to the CH 3 cm-1, C-H distinct peak at 3070 ascribed to the mode of the (ss) stretch and the Fermi resonance (FR) of the CH bending 3”
GasLiquid Interface of Hydrophobic and Hydrophilic Room-Temperature Ionic Liquids and Benzene: Sum Frequency Generation and Surface Tension Studies DOI: 10.1021/jp803177w -
Hydroxyl (O-H) Vertrauen 1,0
“Pure enstatite only exhibits two major O-H absorption cm-1, whereas samples containing bands at 3070 and 3361”
Stalder - 2004 - Influence of Fe, Cr and Al on hydrogen incorporati DOI: 10.1127/0935-1221/2004/0016-0703 -
Hydroxyl (O-H) Vertrauen 1,0
“Figure 4 shows band arising from OH stretching vibrations of hydrogencm-1 ∼3070”
Bujok 等 - 2019 - Applicability of FTIR-ATR Method to Measure Carbon DOI: 10.1155/2019/2181370 -
Vertrauen 1,0
“In particular, the characteristic peaks at 3349 cm-1 for N-H bonds, 3070 cm-1 for alkene C-H bonds, and 2858 and 2538 cm-1 for alkane C-H bonds became gradually apparent when the temperature was above 110 °C (Figure 10b).”
Synthesis and Characterization of Linear Polyisoprene Supramolecular Elastomers Based on Quadruple Hydrogen Bonding DOI: 10.3390/polym12010110 -
Alkyl C-H Vertrauen 1,0
“The spectrum of the archaeological resinous sample indicated a composition very similar to that of modern colophony: shoulder cm-1 at 3070 associated with the vibration of the CH bond in a vinyl group CH2=CRR' and present only in diterpenic”
Ferrant 等 - 2022 - An innovative multi-analytical strategy to assess DOI: 10.1016/j.culher.2022.04.007 -
Water (H2O) Vertrauen 1,0
“At 3098 and 3070 cm-1 cm-1 and at 3220 are related to the absorbed water and are assigned to the O-H 3414 stretch of the hydrogen-bonded O-H groups intramolecular and intermolecular, respectively.”
Gomes 等 - 2007 - Characterization of partially sulfonated polyoxadi DOI: 10.1016/j.memsci.2007.02.046 -
Alkene (C=C) Vertrauen 1,0
“esters,lactones) the cycling ring structure or in its side chains produces (]CH ]C=O(acids) 1715 1715 the weak bands positioned at 3070 from C=C bonds) cm-1 890cm-1 (]C=C) 𝛿CH3/CH2 and 1645 , and the peak at (out-of1475 1475”
Invernizzi 等 - 2018 - Mid and Near-Infrared Reflection Spectral Database DOI: 10.1155/2018/7823248
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.