What absorbs at 2308 cm⁻¹ in an FTIR spectrum?
A band near 2308 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 3 cited sources
Quick answer
A band near 2308 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Atribuiri posibile ale grupelor funcționale
| Grup funcțional | Fapte suport | Surse citate | Încredere maximă |
|---|---|---|---|
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 0,9 |
Clasamentul reflectă dovezile acumulate din literatură, nu o singură regulă autoritară. Confirmați întotdeauna în contextul mostrei dvs.
Possible materials
| Material | Vârfuri suport | Overlapping groups | Surse citate |
|---|---|---|---|
| Fe3O4 | 2308, 2358, 1673 | Methacrylate, Acetate | 1 |
| Fe2O3 | 2308, 1130, 1631 | Methacrylate, Acetate | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 2308 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Literatura din spatele acestor atribuiri
-
încredere 1,0
“Samples were once again, divided randomly into calibration and validation sets with N-H stretching Protein N-H/2308 2280 C-H Protein 50 and 10 samples, respectively.”
Detection of Lipid Oxidation in Infant Formulas: Application of Infrared Spectroscopy to Complex Food Systems DOI: 10.3390/foods9101432 -
Carbonyl (C=O) încredere 1,0
“cm-1 At 2308 was the stretching vibration peak of carbonyl (C=O) and carboxyl (-COOH), and CO mainly came from the decarboxylation and decarbonylation reactions in the 2 cm-1”
Liu 等 - 2023 - Evolution of Pyrolysis Characteristics and Gas Com DOI: 10.15376/biores.18.1.1699-1713 -
Hydroxyl (O-H) încredere 0,9
“Explicitly assigned to hydroxyl groups from D2O experiments.”
The behavior of ozone on different iron oxides surface sites in water DOI: 10.1038/s41598-019-50910-w
Aveți un spectru cu această bandă?
Încărcați spectrul FTIR și obțineți un raport complet de interpretare — atribuiri de peak-uri cu citări din literatură, potriviri cu biblioteca și un lanț de dovezi cu nivel de încredere — în câteva secunde.