What absorbs at 2137 cm⁻¹ in an FTIR spectrum?
A band near 2137 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 3 cited sources
Quick answer
A band near 2137 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
সম্ভাব্য কার্যকরী-গ্রুপ অ্যাসাইনমেন্ট
| কার্যকরী গ্রুপ | সমর্থনকারী তথ্য | উদ্ধৃত সূত্র | সর্বোচ্চ আত্মবিশ্বাস |
|---|---|---|---|
| Hydroxyl (O-H) | 1 | 1 | 1.0 |
| Methoxy (OCH3) | 1 | 1 | 1.0 |
| Methacrylate | 1 | 1 | 1.0 |
| C-O single bond | 1 | 1 | 1.0 |
| Acetate | 1 | 1 | 1.0 |
| Alkyl C-H | 1 | 1 | 1.0 |
| Carbonyl (C=O) | 1 | 1 | 1.0 |
র্যাঙ্কিং জমা হওয়া সাহিত্য প্রমাণ প্রতিফলিত করে, একটি একক কর্তৃত্বপূর্ণ নিয়ম নয়। সর্বদা আপনার নমুনা প্রসঙ্গের বিরুদ্ধে নিশ্চিত করুন।
Possible materials
| উপাদান | সমর্থনকারী শিখর | Overlapping groups | উদ্ধৃত সূত্র |
|---|---|---|---|
| AuNPs | 2137, 1646, 1721 | Hydroxyl (O-H), Methacrylate | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 2137 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
এই অ্যাসাইনমেন্টগুলোর পেছনে সাহিত্য
-
Carbonyl (C=O) আত্মবিশ্বাস 1.0
“The peak value at 2137, and 3391 The presence of alkyl, benzyl, methyl, 500 nm showed a characteristic wavelength for the synthesis and carbonyl groups in the molecule and the polar groups like -OH -NH of gold nanoparticles to increase in a”
Biogenic Synthesis of Gold Nanoparticle from Enicostema axillare and Their In Vitro Cytotoxicity Study Against MCF-7 Cell Line DOI: 10.1007/s12668-019-00656-6 -
Alkyl C-H আত্মবিশ্বাস 1.0
“cm-1 sample a showed five peaks at 1850, 1994, 2021, 2058, and 2137 The peak at 2137 was cm-1 assigned to the free CO dissolved in CH 2Cl [24, 27].”
High-yield synthesis of PVP-stabilized small Pt clusters by microfluidic method DOI: 10.1016/j.cattod.2011.10.008 -
Acetate আত্মবিশ্বাস 1.0
“The peak at 2152 cm-1 with a shoulder peak at 2137 cm-1 is attributed to the C-O vibration on isolated Pd2+ bonded with the hydroxy of”
Zhang 等 - 2019 - Investigation of Various Pd Species in PdBEA for DOI: 10.3390/catal9030247
এই ব্যান্ডের সাথে একটি স্পেকট্রাম আছে?
আপনার FTIR স্পেকট্রাম আপলোড করুন এবং সেকেন্ডের মধ্যে একটি সম্পূর্ণ ব্যাখ্যা রিপোর্ট পান — সাহিত্য সাইটেশন সহ পিক অ্যাসাইনমেন্ট, লাইব্রেরি ম্যাচ এবং একটি আত্মবিশ্বাস-রেটেড এভিডেন্স চেইন।