What absorbs at 1862 cm⁻¹ in an FTIR spectrum?
A band near 1862 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 2 cited sources
Quick answer
A band near 1862 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mulige funktionelle gruppetildelinger
| Funktionel gruppe | Understøttende fakta | Citerede kilder | Højeste tillid |
|---|---|---|---|
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Adsorbed carbon monoxide | 1 | 1 | 1,0 |
| Metal oxygen | 1 | 1 | 1,0 |
Rangering afspejler akkumulerede litteraturbeviser, ikke en enkelt autoritativ regel. Bekræft altid mod din prøvekontekst.
Possible materials
| Materiale | Understøttende toppe | Overlapping groups | Citerede kilder |
|---|---|---|---|
| TiO2 | 1862, 1700, 1093 | Methacrylate, Acetate, C-O single bond | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 1862 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Litteratur bag disse tildelinger
-
tillid 1,0
“distinguished also on the spectra of 1% Au/TiO 2 1% Rh/TiO was 30% [12] and that of 5% Rh/TiO was Bands due to adsorbed CO species (2149, 2030, 1910 and 2 2 1862cm-1) 27%.”
Kecskes 等 - 2004 - FTIR and mass spectrometric study of HCOOH interac DOI: 10.1016/j.apcata.2004.03.021 -
Acetate tillid 1,0
“At the same time, the peak cm-1 cm-1 at 1078 (C-O bond, brown line) and 1862 (C=O bond) began to increase, indicating the at 1078 cm-1 (C-O bond, brown line) and 1862 cm-1 (C=O bond) began to increase, indicating the”
A Novel Synthesis of 4-Acetoxyl 5(4H)-Oxazolones by Direct -Oxidation of N-Benzoyl Amino-Acid Using Hypervalent Iodine DOI: 10.3390/molecules22071102
Har du et spektrum med dette bånd?
Upload dit FTIR-spektrum og få en fuld tolkningsrapport — peak-tildelinger med litteraturhenvisninger, biblioteksmatch og en tillidsvurderet beviskæde — på få sekunder.