Was absorbiert bei 1104 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1104 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1104 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Silicon-oxygen (Si-O) | 4 | 4 | 1,0 |
| Methoxy (OCH3) | 3 | 3 | 1,0 |
| Methacrylate | 3 | 3 | 1,0 |
| C-O single bond | 3 | 3 | 1,0 |
| Acetate | 3 | 3 | 1,0 |
| Siloxane (Si-O-Si) | 2 | 2 | 1,0 |
| Carbohydrate | 2 | 2 | 1,0 |
| Carbonyl (C=O) | 2 | 2 | 0,7 |
| Lignin | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Ammonium | 1 | 1 | 1,0 |
| Nitrate | 1 | 1 | 1,0 |
| Nitrogen heterocycle | 1 | 1 | 0,8 |
| Phosphorus | 1 | 0 | 1,0 |
| Phosphate (PO4) | 1 | 0 | 1,0 |
| Sulfate (SO4) | 1 | 0 | 0,8 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| cellulose | 1104, 1735, 1650 | Methacrylate, C-O single bond, Methoxy (OCH3) | 1 |
| Fe3O4 | 1104, 2358, 1673 | Methacrylate, Silicon-oxygen (Si-O) | 1 |
| iron oxide | 1104, 1130, 891 | Methoxy (OCH3), Methacrylate, C-O single bond | 1 |
| Fe3O4 nanoparticles | 1104, 1673, 1470 | Methacrylate | 1 |
| iron oxide nanoparticles | 1104, 2972, 528 | Methacrylate, Methoxy (OCH3), C-O single bond | 1 |
| DNA | 1104, 1712, 1660 | Methacrylate, C-O single bond, Methoxy (OCH3) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1104 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Vertrauen 1,0
“-1 spectrum (FTIR) corresponds to the Fe-O bond and the peak at 1104.1 cm corresponds to a characteristic peak of PEG binding to the iron core.”
ENHANCEMENT OF THERMAL IMAGING BY IRON OXIDE NANOPARTICLE – PRELIMINARY STUDY DOI: 10.1016/j.bcab.2018.12.005 -
Vertrauen 1,0
“Peaks at 1104, 1033, and cm-1 43962 are assigned to the stretching modes of PO , and cm-1 Ca(NO 3) 2·4H 2O, (NH 4) 2HPO and Zn(NO 3) 2·6H 2O were all the peaks at 603 and 565 are attributable to the bending 4”
Investigation of the effect of doped Zn atom to the hydroxyapatite based on experimental method and first-principles calculations DOI: 10.1007/s41779-019-00430-7 -
Acetate Vertrauen 1,0
“The local peak at 1104 representing C-O, C-O-C stretch, and ring vibrations is attributed mostly to cellulose [42,43].”
Bednarek 等 - 2020 - Exploring the Biochemical Origin of DNA Sequence V DOI: 10.3390/ijms21165770 -
Acetate Vertrauen 1,0
“Moreover, the peak cm-1 cm-1 at 1104 corresponds to the C-O stretching of the C-O-C bond and the peak at 1343 is due to cm-1 the O-H bending of the C-OH group.”
Durazzo 等 - 2018 - Qualitative Analysis of Traditional Italian Dishes DOI: 10.3390/su10114112 -
Hydroxyl (O-H) Vertrauen 1,0
“After thermal modification, cm-1 an increase defined in the peak at 1104 due to OH association of cellulose units.”
Gonultas 和 Candan - 2018 - CHEMICAL CHARACTERIZATION AND FTIR SPECTROSCOPY OF DOI: 10.4067/S0718-221X2018005031301 -
Alkyl C-H Vertrauen 1,0
“The difference between the composition wt.% Additionally, the two peaks at 1103.90 and 924.65 at the two positions was minimal, which confirms the succan be assigned to the in-plane C-H bending vibrations, cm-1 cessful synthesis of both MOF”
Ibrahim 等 - 2018 - Synthesis of Metal-Organic Framework from Iron Nit DOI: 10.1166/jnn.2018.15373 -
Acetate Vertrauen 1,0
“and the peak at 1057 moved to 1104 cm-1, which was the C-O stretching vibration of alcohols, indicating the large release of alcohol after liquefaction (Zhang and Huang 2006;”
Jin 等 - 2021 - Preparation of Microspheres and Microfiber Membran DOI: 10.1002/app.39967 -
Water (H2O) Vertrauen 1,0
“H-OH bending of adsorbed water 1104 Si-O stretching 1104 Si-O stretching 1036 Si-O-Si stretching 1036 Si-O-Si stretching 909”
SO42-/Sn-MMT Solid Acid Catalyst for Xylose and Xylan Conversion into Furfural in the Biphasic System DOI: 10.3390/catal7040118
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.