結果頁面

styrenic aromatic hydrocarbon polymer

請查看上方報告。如果需要後續討論,請使用下方的評論。

結果編號: 20250423235425107656881-1 擁有者: publicuser 評論: 1
FTIR 分析報告

styrenic aromatic hydrocarbon polymer

樣本與測量參數

報告編號 20250423235425107656881-1
日期 2025-04-24 03:39:06
光譜範圍 (cm⁻¹) [(650, 4000)]
基線 AsLS基線校正
資料庫比對 0%

鑑定結果

0%

該FTIR圖譜與苯乙烯型芳香烴聚合物最為一致,最近譜庫匹配為聚苯乙烯。此方向由3031-3081 cm-1附近的芳香C-H伸縮、1604和1493 cm-1的芳香環譜帶、701、751和758 cm-1的強面外芳香C-H譜帶,以及2926和2857 cm-1的脂肪族C-H伸縮所支持,這些共同表徵了苯基取代的烴聚合物。然而,譜庫置信度非常低,且無直接參考文獻或相關文獻證據獨立確認特定實體歸屬,因此最合理的結論是苯乙烯型芳香烴聚合物方向,而非明確的實體鑑定。

詳細解讀

  • 最佳庫匹配: 聚苯乙烯 #46662 | match 0.0%
  1. 該FTIR圖譜與苯乙烯型芳香烴聚合物最為一致,最近譜庫匹配為聚苯乙烯。此方向由3031-3081 cm-1附近的芳香C-H伸縮、1604和1493 cm-1的芳香環譜帶、701、751和758 cm-1的強面外芳香C-H譜帶,以及2926和2857 cm-1的脂肪族C-H伸縮所支持,這些共同表徵了苯基取代的烴聚合物。然而,譜庫置信度非常低,且無直接參考文獻或相關文獻證據獨立確認特定實體歸屬,因此最合理的結論是苯乙烯型芳香烴聚合物方向,而非明確的實體鑑定。
  2. 最近譜庫匹配:聚苯乙烯,且有多個其他聚苯乙烯條目佔據前幾名候選位置。
  3. 常見前15名譜庫模式:主要為苯乙烯型、芳香烴聚合物光譜。
  4. 芳香C-H伸縮出現在3031、3071和3081 cm-1。
  5. 芳香環振動出現在1604和1493 cm-1。
  6. 面外芳香C-H譜帶在701、751和758 cm-1支持苯乙烯型芳香取代模式。
  7. 脂肪族C-H譜帶在2926、2857、1450、1376和1360 cm-1支持烴聚合物骨架。
  8. 領先的譜庫候選者絕大多數是聚苯乙烯條目,且更廣泛的前15名模式由苯乙烯型材料主導。
  9. 樣品在1604和1493 cm-1顯示特徵芳香環特徵,以及在3031、3071和3081 cm-1的芳香C-H伸縮。
  10. 701、751和758 cm-1的譜帶與苯乙烯型苯環環境預期的芳香C-H面外彎曲一致。
  11. 2926和2857 cm-1的脂肪族C-H伸縮支持烴聚合物主鏈。
  12. 報告的峰列表未指示明確的羰基、羥基、腈基或其他強雜原子官能團,這使方向保持在主要為烴類芳香聚合物類別內。
  • 譜庫匹配置信度報告為低,因此僅憑檢索不足以進行明確的材料鑑定。
  • 未檢索到相關文獻匹配以將歸屬縮小到超出苯乙烯型芳香聚合物方向。
  • 報告的證據未確定材料是純聚苯乙烯還是相關的苯乙烯型材料、共混物、共聚物或改性形式。
  • 現有證據支持苯乙烯型芳香化學,但未能可靠區分聚苯乙烯與密切相關的苯乙烯型聚合物材料。
  • 次要譜帶如903、1025和1070 cm-1在此不足以證明更具體的配方,除非有更強的參考支持。
  • 由於缺乏直接文獻和參考確認,實體層級的歸屬仍不如廣泛的化學方向確定。

建議的下一步: Compare the sample directly against a verified Polystyrene reference spectrum collected under the same ATR or transmission conditions, focusing on the relative intensities and exact positions of the 1604, 1493, 758, and 701 cm-1 bands. Inspect the full spectrum for the typical styrenic fingerprint-region pattern and for any weak heteroatom-associated bands that could indicate additives, oxidation, or copolymerization. If a firmer identification is needed, use complementary methods such as Raman spectroscopy, DSC or TGA, or pyrolysis-GC/MS to distinguish Polystyrene from other styrenic polymers or blends. If the sample is a manufactured article, analyze a cleaned interior cross-section to reduce interference from surface coatings, weathering, or contamination.

資料庫比對

匹配群組:
資料庫光譜將顯示於此。

資料庫搜尋結果 — 前15名候選

排名 匹配% 化合物 SMILES 光譜編號 動作
正在載入資料庫候選...

波峰分析

★ = 文獻支持的分配
# 波數 (cm⁻¹) 吸光度 分配 引用 歸屬狀態
1 · 701 1.00 - - -
2 · 2926 0.92 - - -
3 · 1450 0.91 - - -
4 · 3031 0.91 - - -
5 · 751 0.83 - - -
6 · 758 0.71 - - -
7 · 1493 0.41 - - -
8 · 3071 0.37 - - -
9 · 3081 0.33 - - -
10 · 2857 0.31 - - -
11 · 1604 0.28 - - -
12 · 1025 0.20 - - -
13 · 903 0.14 - - -
14 · 1070 0.13 - - -
15 · 1360 0.11 - - -
16 · 1376 0.11 - - -

附錄 — 原始光譜

原始樣品光譜
生成者 FTIR.fun — 報告 #20250423235425107656881-1 2025-04-24 03:39:06
討論

評論與後續證據

使用此區域繼續解讀、提問或新增額外驗證證據。

The user from Taiwan (IP: 2407::) uploaded a DOCX file containing three IR spectra. Swipe up to view the qualitative analysis of the first spectrum. The user also expressed intent to calculate sample thickness using interference peaks. Based on the spectra, the analysis was performed at wave numbers 2501 and 2563, yielding an interference peak difference (V₁ - V₂) of 62 cm-1 and ΔN = 1. By inputting the film's refractive index(n), the sample thickness (d) was determined.Here is the original spectrum of the sample extracted from the DOCX file.1.png

en&2
提交需求 表單