Was absorbiert bei 981 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 981 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 981 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Ring structure | 2 | 2 | 1,0 |
| Silicon (Si) | 2 | 2 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| Oxygen heterocycle | 1 | 1 | 1,0 |
| Amino acid | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Silanol (Si-OH) | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| graphene oxide | 981, 1150, 3400 | Hydroxyl (O-H) | 1 |
| gelatin | 981, 1652, 3300 | Hydroxyl (O-H) | 1 |
| silver nanoparticles | 981, 1636, 1631 | Hydroxyl (O-H) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 981 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Alkyl C-H Vertrauen 1,0
“the vibration identified as ν(C-H) is found in SERS spectrum in a less intense band at 981 Despite the similarity of SERS signal acquired for neutral and deprotonated state of artepillin C,”
EXPRESS: Vibrational Spectroscopic Characterization and Coherent Anti-Stokes Raman Spectroscopy (CARS) Imaging of Artepillin C DOI: 10.1177/0003702820904456 -
Silanol (Si-OH) Vertrauen 1,0
“line This observation is accompanied with the reduction of network SiO band at 802 2 cm-1 Meanwhile, the Si-OH peak at 981 showed the increased of intensity in silica synthesized using 1% and 2% of gelatin concentration.”
The effect of gelatin as pore expander in green synthesis mesoporous silica for methylene blue adsorption DOI: 10.1038/s41598-022-19615-5 -
C-O single bond Vertrauen 1,0
“Finally, two bands may be found at 981 and 1051 potentially related to C-O 1 and to the stretching of C-OH bonds from hydroxyl moieties [51].”
Basso Peressut 等 - 2021 - Development of self-assembling sulfonated graphene DOI: 10.1016/j.matchemphys.2020.122945. -
Silicon (Si) Vertrauen 1,0
“Two strong peaks are noticed: one of them centered at 981 cm-1, attributed to symmetric stretching vibration of Si(Al)-O-Si bonds, and another one at 527”
Use of Slag/Sugar Cane Bagasse Ash (SCBA) Blends in the Production of Alkali-Activated Materials DOI: 10.3390/ma6083108 -
Amide Vertrauen 1,0
“The absorbance peak located at around 981 and 996 can be assigned is the C-N stretching vibrations cm-1 peak located at around 981 and 996 cm-1 can be assigned is the C-N stretching vibrations of amine.”
Green Synthesis, Characterization, Enzyme Inhibition, Antimicrobial Potential, and Cytotoxic Activity of Plant Mediated Silver Nanoparticle Using Ricinus communis Leaf and Root Extracts DOI: 10.3390/biom11020206 -
Ring structure Vertrauen 1,0
“In the curve of the EHO, cm-1 peaks at 981 characteristic of the anti-symmetric deformation vibration absorption peaks at 981 cm-1 characteristic of the anti-symmetric deformation vibration absorption cm-1 four-membered peak of the ring in”
Preparation of Bis[(3-ethyl-3-methoxyoxetane)propyl]diphenylsilane and Investigation of Its Cationic UV-Curing Material Properties DOI: 10.3390/polym13152573 -
Aromatic ring Vertrauen 1,0
“Moreover, in the Raman spectrum (Figure 4b), the vibrations from symmetric benzene/pyrrole in-phase and out-of-phase breathing modes of tryptophan and phenylalanine (904 cm-1, 981 cm-1) are observed.”
FTIR and Raman Spectroscopy-Based Biochemical Profiling Reflects Genomic Diversity of Clinical Candida Isolates That May Be Useful for Diagnosis and Targeted Therapy of Candidiasis DOI: 10.3390/ijms20040988 -
Ring structure Vertrauen 1,0
“In the GO spectrum, the peak at 1049 cm-1 corresponds to the alkoxy group [15,28] and the one at 981 cm-1 is assigned to the ring out-of-plane deformation [29].”
Synthesis and Characterization of Some Graphene Oxide Powders Used as Additives in Hydraulic Mortars DOI: 10.3390/app112311330
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.