What absorbs at 963 cm⁻¹ in an FTIR spectrum?
A band near 963 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Schnelle Antwort
A band near 963 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Carbonate | 2 | 2 | 1,0 |
| Alkyl C-H | 2 | 2 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| Phosphate (PO4) | 2 | 2 | 1,0 |
| Silicon-oxygen (Si-O) | 2 | 2 | 1,0 |
| Metal oxygen | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Ammonium | 1 | 1 | 0,7 |
| Silanol (Si-OH) | 1 | 0 | 0,9 |
Das Ranking spiegelt die gesammelte Literatur Evidenz wider, nicht eine einzelne maßgebliche Regel. Bestätigen Sie immer anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| hydroxyapatite | 963, 1620, 1639 | Phosphate (PO4), Hydroxyl (O-H), Alkyl C-H | 1 |
| calcium carbonate | 963, 3232, 2954 | Alkyl C-H, Carbonate, Hydroxyl (O-H) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 963 cm⁻¹ is usually not enough for material identification by itself.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Amide Vertrauen 1,0
“(The reason for this asCH 963cm-1,forinstance,reacheszeroabove250°C.Inpartb,the C-N+ signment is discussed later.) The peak observed at about peaks assigned to bound are more stable toward high cm-1 temperature relative to the unbound headg”
Nikoobakht 和 El-Sayed - 2001 - Evidence for bilayer assembly of cationic surfacta DOI: 10.1021/la010530o -
Silicon (Si) Vertrauen 1,0
“Then, both peaks at cm-1 cm-1, 1175 and 1063 disappear and a single peak at 963 which is caused by Si-O-Na bonding, can be seen after 3 h of the reaction.”
Alumino-Silicate Structural Formation during Alkali-Activation of Metakaolin: In-Situ and Ex-Situ ATR-FTIR Studies DOI: 10.3390/ma16030985 -
Vertrauen 1,0
“v(SiO-H) 1200, 1112, 963 1252, 1099, 1095, 785 0.6, 0.59, 0.53, 0.18 v(SiOSi, vibrations) δ(OClO-Si-O-H) 963 988 0.31 (monodentate)”
Insights into interactions of chlorine-based cleaning products with indoor relevant surfaces DOI: 10.1071/EN22031 -
Phosphate (PO4) Vertrauen 1,0
“The peak at 963 cm-1 is related to the PO43υ1 vibration units)”
Gavinho 等 - 2023 - An Eco-Friendly Process to Extract Hydroxyapatite DOI: 10.3390/jfb14050279 -
Phosphate (PO4) Vertrauen 1,0
“cm-1 HA) showed the deep absorption peaks of PO at 1083-1035 The peak at 963 was due to PO43-”
Low-Cost Deposition of Antibacterial Ion-Substituted Hydroxyapatite Coatings onto 316L Stainless Steel for Biomedical and Dental Applications DOI: 10.3390/coatings10090880 -
Alkene (C=C) Vertrauen 1,0
“particularly clear are the trans -CH=CHgroup vibrations butadiene at 963 cm-1), 907 cm-1 (=C-H out of plane bending of vinyl groups) and 697 cm-1 cm-1), cm-1 of butadiene at 963 907 (=C-H out of plane bending of vinyl groups) and”
Material Analysis and a Visual Guide of Degradation Phenomena in Historical Synthetic Polymers as Tools to Follow Ageing Processes in Industrial Heritage Collections DOI: 10.3390/polym14010121 -
C c single bond Vertrauen 1,0
“cm-1 cm-1 cm-1 peak, 1075 is C-C vibration, 963 and 852 are Sulfur, wt.”
Ma 和 Liu - 2014 - Effect High Temperature Annealing on Graphitizatio DOI: 10.14233/ajchem.2014.16186A -
Carbonate Vertrauen 1,0
“to PO Analysis cm-1 cm-1 Bands of 963 and 1500-1400 are related to the CO group, which is related to the carbonate ion of hydroxyapatite Powder preparation by sol-gel method.”
Montazeri 等 - 2011 - Synthesis of fluorapatite-hydroxyapatite nanoparti DOI: 10.2147/IJN.S15461
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekunden einen vollständigen Interpretationsbericht – Peakzuweisungen mit Literaturzitaten, Bibliotheksübereinstimmungen und einer vertrauensbewerteten Evidenzkette.