Was absorbiert bei 889 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 889 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 889 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Ring structure | 3 | 3 | 1,0 |
| Carbohydrate | 2 | 2 | 1,0 |
| Phosphate (PO4) | 2 | 2 | 1,0 |
| Alkene (C=C) | 2 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 0,9 |
| C c single bond | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| Cellulose | 889, 1735, 1650 | Carbohydrate | 1 |
| DNA | 889, 1712, 1660 | Phosphate (PO4) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 889 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Phosphate (PO4) Vertrauen 1,0
“831 833 [19] Backbone O-P-O bending 964 964 [19] Deoxyribose Deoxyribose ring vibration 889 889”
Han 等 - 2018 - Insight into Rapid DNA-Specific Identification of DOI: 10.3390/molecules23112842 -
Ring structure Vertrauen 1,0
“acid.44 illustrated both IOP and Se-IOP contained 1000 to 1200 the presence of β-galactopyranose and β-galacturonic ring.12 cm-1 The absorption peak at 889.51 or 889.1 Four carbon signal peaks in the region of 80.0-70.0 ppm and pyranoid sho”
Hu 等 - 2017 - Effects of Selenizing Modification on Characterist DOI: 10.1007/s13233-017-5030-z -
Carbohydrate Vertrauen 1,0
“The characteristic bands of β-glucan are at 1156, 1076, 889cm-1.”
Liu 等 - 2006 - A study of the mushrooms of boletes by Fourier tra DOI: 10.1117/12.667136 -
Ring structure Vertrauen 1,0
“The weak band at 923 can be cm(cid:2)1, ascribed to the NH twisting, followed by a weak band at 889 which is related 3 cm(cid:2)1 to the ring deformation.”
Synthesis, crystal structure, and characterization of cyclohexylammonium tetraisothiocyanatocobaltate(II): A single-source precursor for cobalt sulfide and oxide nanostructures DOI: 10.1016/j.heliyon.2019. -
Phosphate (PO4) Vertrauen 1,0
“New peaks appeared at the PCF FTIR spectrum (Figure 3(c2)): the characteristic absorption cm-1 cm-1 peak at 2393 corresponded to the P-H absorption, the peak at 889 was due to cm-1 the P-O-C absorption and the peaks at 1269 were attributed”
Polybenzoxazine Resins with Cellulose Phosphide: Preparation, Flame Retardancy and Mechanisms DOI: 10.3390/polym13244288 -
Vertrauen 1,0
“N-H N-Hstretch O=C=N, , 889, 1450 CH2 0.4 , absorbance 1650 CH2”
Atmospheric Pressure Plasma Polymerized 2-Ethyl-2-oxazoline Based Thin Films for Biomedical Purposes DOI: 10.3390/polym12112679 -
Carboxyl (COOH) Vertrauen 1,0
“Bands at 2916, 2848, 889 cm-1 spectra of libraries, but in this case, these shifts could be ascribed to a can be ascribed to stearic acid, usually added to 1710, and 1472 siliconeand other polymers asstabilizingagent[21].”
Non-invasive identification of plastic materials in museum collections with portable FTIR reflectance spectroscopy: Reference database and practical applications DOI: 10.1016/j.microc.2015.07.016 -
Carbohydrate Vertrauen 1,0
“The infrared spectra of from oats and barley cm-1 showed a broad peak at a wavelength of 3000-3500 corresponding to OH groups, cm-1 cm-1 2922-3000 corresponding to C-H stretch, 1654.55 corresponding to bending cm-1 vibrations of bound water”
Shah 等 - 2022 - Encapsulation of Catechin into beta-Glucan Matrix DOI: 10.3390/foods11101493
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.