What absorbs at 738 cm⁻¹ in an FTIR spectrum?
A band near 738 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 7 cited sources
Quick answer
A band near 738 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
可能性のある官能基アサイン
| 官能基 | 裏付け事実 | 引用元 | 最高信頼度 |
|---|---|---|---|
| Carboxyl (COOH) | 1 | 1 | 1.0 |
| Alkene (C=C) | 1 | 1 | 1.0 |
| Metal oxygen | 1 | 1 | 1.0 |
| Imide | 1 | 1 | 1.0 |
| Ring structure | 1 | 1 | 1.0 |
ランキングは蓄積された文献証拠を反映しており、単一の権威あるルールではありません。常にサンプルのコンテキストと照合して確認してください。
Possible materials
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 738 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
これらのアサインの根拠となる文献
-
Ring structure 信頼度 1.0
“cm-1 cm-1 1487 is corresponds to C C stretching vibration of benzoniod ring, 1302 is cm-1 N bonds of aromatic amines 1236 corresponds to C N due to the stretching of C cm-1 corresponds to C H in plane of aromatic rings stretching of benzoni”
Patil 等 - 2011 - Electrical Conductivity of PolyanilineNiZnO3 Comp DOI: 10.1080/00150193.2011.620836 -
Imide 信頼度 1.0
“explicit assignment”
Purushothaman 和 Bilal - 2014 - Development and characterization of homo, co and t DOI: 10.1515/polyeng-2013-0167 -
Metal oxygen 信頼度 1.0
“for zinc cm(cid:1)1 Al-O-P, phosphates,9 particular, the peak at 738 is assigned to bands at and Rotole and Sherwood for model aluminium 811,1025,1060and1070cm(cid:1)1areassignedtoP-O-Pmodes,and 31P phosphates.11,12 The FTIR, XRD and solid-”
Rationalization of the X-ray photoelectron spectroscopy of aluminium phosphates synthesized from different precursors DOI: 10.1039/c9ra08738a -
Alkene (C=C) 信頼度 1.0
“% 1,2 vinyl isomer = S 910/(S 738+S 910+S 965)×100 (4) As Figure 2 shows the general trend in each graph is a 738, S 965, and S are peak area at 738, 965, and Where S decrease in the peak area and a shift to the lower temperatures”
Ganjali 等 - 2014 - Correlation between Physico-Mechanical and Rheolog DOI: 10.7317/pk.2014.38.4.425 -
Carboxyl (COOH) 信頼度 1.0
“The absorbance at 1,738 cm-1 (Figure 6B) appeared to correspond to the carboxylic et al., 2013).”
Permeation of Silver Sulfadiazine Into TEMPO-Oxidized Bacterial Cellulose as an Antibacterial Agent DOI: 10.3389/fbioe.2020.616467 -
信頼度 0.9
“Explicit assignment to Pine tree sp.”
In-Situ Comparative Study of Eucalyptus, Basil, Cloves, Thyme, Pine Tree, and Tea Tree Essential Oil Biocide Efficacy DOI: 10.3390/mps5030037 -
信頼度 0.8
“assigned to Bi2Al4O9”
Zhang 等 - 2013 - Synthesis and Characterization of Bi2Al4O9 Powders DOI: 10.4028/www.scientific.net/AMR.624.34
このバンドを持つスペクトルがありますか？
FTIRスペクトルをアップロードすると、数秒で完全な解釈レポート（文献引用付きピークアサイン、ライブラリマッチ、信頼度評価付き証拠チェーン）を取得できます。