Was absorbiert bei 570 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 570 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 570 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Metal oxygen | 16 | 13 | 1,0 |
| Phosphate (PO4) | 6 | 5 | 1,0 |
| Silicon-oxygen (Si-O) | 4 | 4 | 1,0 |
| Hydroxyl (O-H) | 4 | 3 | 1,0 |
| Silicon (Si) | 3 | 3 | 1,0 |
| Phosphorus | 2 | 2 | 1,0 |
| Hydrogen bond | 2 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| Sulfonate | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Nitrate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Borate | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| MWCNTs | 570, 3396, 1735 | Hydroxyl (O-H) | 1 |
| Fe3O4 | 570, 2358, 1673 | Hydroxyl (O-H), Metal oxygen, Silicon-oxygen (Si-O) | 1 |
| SiO | 570, 800, 1745 | Silicon-oxygen (Si-O), Hydroxyl (O-H) | 1 |
| Fe3O4 nanoparticles | 570, 1673, 1470 | Hydroxyl (O-H), Metal oxygen | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 570 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Vertrauen 1,0
“The Raman peaks at 570 could be due to The authors thank the Department of Science and in-plane bending from carbon and oxygen from the phenolic Technology - Nano Mission India (grant no.”
Kalmodia 等 - 2013 - Synthesis and characterization of surface-enhanced DOI: 10.2147/IJN.S49447 -
Hydrogen bond Vertrauen 1,0
“The FTIR data indicates that y1 SiH bonds dominate over Ge:H bonds by the absence of peaks at 570 and 1880 cm .”
Soukup 等 - 2004 - Deposition of high quality amorphous silicon, germ DOI: 10.1016/j.surfcoat.2003.08.006 -
Phosphate (PO4) Vertrauen 1,0
“The FTIR spectra after HBSS immersion show a split peak at approximately 570 It corresponds 43to P-O bonding vibrations in a PO tetrahedron and indicates the presence of crystalline calcium phosphates including carbonated hydroxyapatite (CH”
Fabrication of sol-gel derived new quaternary silicate Bioglass S55P4 DOI: 10.1063/1.5089369 -
Phosphate (PO4) Vertrauen 1,0
“Two PO bending modes at 569.6 and bands were attributed to the 4(PO 4) modes .The”
Wang 等 - 2005 - Nanostructure properties of hydroxyapatite nanobel DOI: 10.4028/www.scientific.net/KEM.288-289.187 -
Vertrauen 1,0
“The FTIR remained the inverse spinel crystal structure of cubic Fe 4 3O characteristic peaks of MWCNTs weakened or disappeared due to the anchor of Fe 4 Fe-O cm-1 nanoparticles and peak at 570 was indicative of the formation of Fe 3O 4.”
Xu 等 - 2016 - Heterogeneous Fenton-like discoloration of methyl DOI: 10.1007/s11706-016-0326-z -
Metal oxygen Vertrauen 1,0
“cm(cid:4)1 Magnetic structures characteristic of the Fe-O bonding in inverted spinel structure and the absorption band at 570 cm(cid:4)1 indicating the presence of PDMS on the magnetic iron oxide bands in 1263, 1105, 1025 and 800 particles.”
Particles that slide over the water surface: Synthesis and characterization of iron oxides particles coated with PDMS, with hydrophobic and magnetic properties DOI: 10.1016/j.matchemphys.2015.05.014 -
Borate Vertrauen 1,0
“ions as well as the distinct band at cm-1, It is accepted by several studies on fluoro-borate glasses 460 which is related to the alteration of B-O-B cm-1 that due to the analogous masses and almost equal radii of bond angle, while the band”
Influence of Vanadium Oxide on the Optical and Electrical Properties of Li (Oxide or Fluoride) Borate Glasses DOI: 10.1007/s11664-022-10187-8 -
Vertrauen 1,0
“However, the main bands that characterize the formation of spinel phase are located at 570 cm-1, and 440 which are associated with the vibrations of Zn-O and Fe-O bonds, respectively [27,44].”
Effects of Solvent Diols on the Synthesis of ZnFe2O4 Particles and Their Use as Heterogeneous Photo-Fenton Catalysts DOI: 10.3390/ma7096281
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.