What absorbs at 439 cm⁻¹ in an FTIR spectrum?
Una banda cerca de 439 cm⁻¹ puede apuntar a varios grupos funcionales. A continuación se muestran las asignaciones más probables, clasificadas por cuánta evidencia publicada respalda cada una — cada una trazable a literatura (DOI) y validada de forma cruzada con nuestros más de 130,000 espectros de referencia y grafo de conocimiento.
Backed by 7 cited sources
Quick answer
A band near 439 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Posibles asignaciones de grupos funcionales
| Grupo funcional | Hechos de respaldo | Fuentes citadas | Confianza máxima |
|---|---|---|---|
| Silicon-oxygen (Si-O) | 4 | 4 | 1,0 |
| Metal oxygen | 2 | 2 | 1,0 |
| Silicon (Si) | 2 | 2 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 0 | 1,0 |
La clasificación refleja la evidencia acumulada de la literatura, no una única regla autorizada. Siempre confirme según el contexto de su muestra.
Possible materials
| Material | Supporting peaks | Overlapping groups | Fuentes citadas |
|---|---|---|---|
| kaolinite | 439, 3696, 693 | Silicon-oxygen (Si-O), Silicon (Si), Siloxane (Si-O-Si) | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 439 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Literatura detrás de estas asignaciones
-
C c single bond confianza 1,0
“absorption peak is observed near 439 This feature cm(cid:3)1 (A0) n C¼C-C is attributed to in-plane bending mode of 3.3.1.”
Temperature-dependent absorption cross-section measurements of 1-butene (1-C4H8) in VUV and IR DOI: 10.1016/j.jqsrt.2012.09.014 -
confianza 1,0
“a peak at 439 arises from Si-O-Si bending vibration.”
Souissi 等 - 2022 - Synthesis, Thermal Properties and Electrical Condu DOI: 10.21203/rs.3.rs-1294285/v1 -
Silicon (Si) confianza 1,0
“The absorption band detected at 439 wavenumber cm-1 can be ascribed to Si-O bending.”
Hydroprocessing of Oleic Acid for Production of Jet-Fuel Range Hydrocarbons over Cu and FeCu Catalysts DOI: 10.3390/catal9121051 -
Metal oxygen confianza 1,0
“Process., 56(5), 2020, 860-873 865 cm-1 and 439.45 cm-1 were contributed by asymmetric stretching vibration peaks and out-of-plane bending vibration absorption peaks of -W-O bonds of WO 42-.”
Lu 等 - 2020 - Effect of manganese ions addition orders on the fl DOI: 10.37190/ppmp/126421 -
confianza 1,0
“The 439 peak in the geopolymer relative to Si-O bond while in powders this cm-1.”
Pereira 等 - 2019 - Synthetic Aluminosilicates for Geopolymer Producti DOI: 10.1590/1980-5373-MR-2018-0508 -
Metal oxygen confianza 0,9
“Nb-O bond characteristic”
Wang 和 Jiang - 2011 - Synthesis and Characterization of LiNbO3 Powders b DOI: 10.1080/00150193.2011.554260 -
Silicon-oxygen (Si-O) confianza 0,9
“Stretching vibrations of Si-O-T or Al.”
EL Alouani 等 - 2020 - Influence of the Nature and Rate of Alkaline Activ DOI: 10.1155/2020/8880906
¿Tiene un espectro con esta banda?
Cargue su espectro FTIR y obtenga un informe de interpretación completo — asignaciones de picos con citas bibliográficas, coincidencias de librerías y una cadena de evidencia con calificación de confianza — en segundos.