What absorbs at 1296 cm⁻¹ in an FTIR spectrum?
A band near 1296 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Kiire vastus
A band near 1296 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Võimalikud funktsionaalrühmade määramised
| Funktsionaalrühm | Toetavad faktid | Tsiteeritud allikad | Kõrgeim usaldusväärsus |
|---|---|---|---|
| Secondary amine | 3 | 3 | 1,0 |
| C n single bond | 3 | 3 | 1,0 |
| Amide | 3 | 3 | 1,0 |
| Methoxy (OCH3) | 2 | 2 | 1,0 |
| Methacrylate | 2 | 2 | 1,0 |
| Acetate | 2 | 2 | 1,0 |
| C-O single bond | 2 | 2 | 1,0 |
| Aromatic ring | 2 | 2 | 1,0 |
| C=n | 2 | 2 | 1,0 |
| N h | 2 | 2 | 1,0 |
| Alkyl C-H | 2 | 2 | 1,0 |
| Urethane | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Fluorine (C-F) | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 0,9 |
| Protein | 1 | 1 | 0,7 |
Reiting kajastab kogunenud kirjanduslikke tõendeid, mitte ühte autoriteetset reeglit. Kinnitage alati oma proovi kontekstis.
Võimalikud materjalid
| Materjal | Toetavad piigid | Kattuvad rühmad | Tsiteeritud allikad |
|---|---|---|---|
| TiO2 | 1296, 1700, 1093 | Methoxy (OCH3) | 1 |
| TiO | 1296, 1730, 1699 | Methoxy (OCH3) | 1 |
| PE | 1296, 1414, 1700 | Methoxy (OCH3) | 1 |
| PP | 1296, 1700, 1043 | Methoxy (OCH3) | 1 |
| TiO2 nanoparticles | 1296, 1700, 455 | Methoxy (OCH3) | 1 |
Materjale kuvatakse ainult siis, kui sama kirjanduse kogum toetab seda riba ja vähemalt ühte täiendavat iseloomulikku piiki.
Spektri loogika
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 1296 cm⁻¹ is usually not enough for material identification by itself.
Reaalse maailma kasutus
Seda tüüpi päring on tavaline polümeeri tuvastamisel, tundmatu plasti sõeluuringul, kvaliteedikontrolli probleemide lahendamisel, ringlussevõetud materjali kontrollimisel ja kirjandusel põhineval piirkinnituste ülevaatel.
Levinud vead
- Ühe isoleeritud riba käsitlemine materjali tõendina ilma vähemalt ühte või kahte toetavat piiki kontrollimata.
- Ülekattumise ignoreerimine: mitu funktsionaalrühma võivad anda panuse sama lainearvu lähedal.
- Valideerimise vahelejätmine, kui lisandid, segud, oksüdatsioon või saastumine võivad spektrit moonutada.
Kontrollimise nõuanne
Kui ebakindlus püsib, kinnitage hüpotees DSC, GC-MS või TGA abil, eriti segude, lagunenud proovide ja täidetud polümeeride puhul.
Nende määramiste taga olev kirjandus
-
Amide usaldusväärsus 1,0
“The charfrom cm-1 acteristic peak at 1296 indicates the C N stretching vibration of the aromatic Downloaded amine units.”
A facile synthesis of poly(aniline-co-o-bromoaniline) copolymer: Characterization and application as semiconducting material DOI: 10.1142/S0217979216500089 -
usaldusväärsus 1,0
“It is clear that carbon, oxygen, and phosof GNP-g-APP shows a peak at 1296 correspectrum”
Phosphorization of exfoliated graphite for developing flame retardant ethylene vinyl acetate composites DOI: 10.1016/j.jmrt.2020.04.085 -
Amide usaldusväärsus 1,0
“cm21 is generally agreed that the band at 1296 is caused by C-N single, C vN double, and C wN triple bonds were obsp21sp3 b-C”
Wei - 2001 - Formation of beta-C3N4 crystals at low temperature DOI: 10.1063/1.1327603 -
Amide usaldusväärsus 1,0
“The bands at 1296 implied the stretching mode of C-N, which is associated with the presence of povidone.”
Assiry 等 - 2023 - Microstructural and Elemental Characterization of DOI: 10.3390/app13074517 -
usaldusväärsus 1,0
“A negative band at 1296 is assigned C b g to the C-F stretching modes of fluorotyrosine in wild-type”
Hydrogen Bonding in Human Manganese Superoxide Dismutase Containing 3-Fluorotyrosine DOI: 10.1529/biophysj.105.060616 -
Alkyl C-H usaldusväärsus 1,0
“The Raman 3 cm-1 bands located at 1296 and 1454 originated from CH and CH deformation vibrations, respectively.”
Optical photothermal infrared spectroscopy with simultaneously acquired Raman spectroscopy for two-dimensional microplastic identification DOI: 10.1038/s41598-022-23318-2 -
C=n usaldusväärsus 1,0
“Comparatively strong doublet ATR-FTIR bands at ~1557 and ~1542 cm-1 and bands at 1296 and cm-1 814 of layers #2 and #5 (ascribed by a solid heart sign in inset (a) of Figure S1) were assigned to the -C=N, asymmetric -C-N, symmetric -C-N, an”
Multi-Modal Compositional Analysis of Layered Paint Chips of Automobiles by the Combined Application of ATR-FTIR Imaging, Raman Microspectrometry, and SEM/EDX DOI: 10.3390/molecules24071381 -
Acetate usaldusväärsus 1,0
“Furcm-1 (origithermore, the intensity of band at 1296 nating from the C-O stretching vibrations of phenoFigure 6.”
Radoman 等 - 2015 - Effect of surface modified TiO2 nanoparticles on t DOI: 10.3144/expresspolymlett.2015.83
Kas teil on selle ribaga spekter?
Laadige üles oma FTIR spekter ja saage sekunditega täielik tõlgendusaruanne — piikide määramised kirjandusviidetega, raamatukogu vasted ja usaldusväärsusega hinnatud tõendite ahel.