Was absorbiert bei 946 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 946 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 946 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Metal oxygen | 3 | 2 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Metal hydroxyl | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Silicate | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| polymer | 946, 1718, 1722 | Hydroxyl (O-H) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 946 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Silicate Vertrauen 1,0
“Peak present at 483 and 946cm-1 563cm-1 vibrational mode is present at in Ca2Y2Si2O9 silicate in Ca2Y2Si2O9 and Sr2Y2Si2O9 phosphor is due to the SiO4”
Down-conversion characteristics of Eu3+ doped M2Y2Si2O9 (M = Ba, Ca, Mg and Sr) nanomaterials for innovative solar panels DOI: 10.1016/j.pnsc.2019.07.003 -
Metal oxygen Vertrauen 1,0
“As the absorption edge depends on the oxygen and also contain asymmetric stretching vibrations units.(29,32) network,(38) bond strength in the glass of Bi-O bonds in [BiO 3] pyramidal The the obtained cm-1 cm-1 absorption bands at ~946 and”
Synthesis, thermal and spectroscopic characterization of lithium bismuth borate glasses containing mixed transition metal ions DOI: 10.13036/17533562.57.3.018 -
Phosphate (PO4) Vertrauen 1,0
“In addition, the stretching vibration peaks of P-O were at 1026 cm-1, 946 cm-1 and 920 cm-1;”
-Amino Phosphonic Acid as the Oxidized Ore Collector: Flexible Intra-Molecular Proton Transfer Providing an Improved Flotation Efficiency DOI: 10.3390/min12080918 -
C c single bond Vertrauen 1,0
“In addition, it showed C-H bending cm-1, cm-1, vibrations at 1467 C-O-C (ether) stretching vibrations at 1280 and C-C (ethyl) u cm-1 stretching vibrations at 946 (Frydrych et al.”
Physical properties and solubility studies of Nifedipine-PEG 1450/HPMCAS-HF solid dispersions DOI: 10.1039/C5PY01136A -
Alkene (C=C) Vertrauen 1,0
“[BBSQ-Cu2+], showed a peak at 671.3481, assigned to and Fe3+, Cu2+, Hg2+, and the metal chelator ethylene diamine tetBBSQ-Hg2+ system showed a peak at 945.6797, assigned to aer raacetic acid (EDTA) was added to the system BBSQ OH- [BBSQ-Hg”
NIR squaraine dyes for dual colorimetric and fluorescent determination of Fe3+, Cu2+, and Hg2+ ions DOI: 10.1039/d3ra02419a -
Water (H2O) Vertrauen 1,0
“The bands located at 946 and water molecules represented by peaks at around 3440 and cm(cid:3)1”
Silver-controlled evolution of morphological, structural, and optical properties of three-dimensional hierarchical WO3 structures synthesized from hydrothermal method DOI: 10.1016/j.jallcom.2017.11.095 -
Metal oxygen Vertrauen 1,0
“the carbonyl oxygen acts as the Lewis base and the proton of the hydroxyl group is the Lewis cm-1 cm-1 The peaks observed at 946 and 1037 are from the Al-O and Al-OH stretching and bending vibraal.43 tions.”
Pletincx 等 - 2017 - In Situ Characterization of the Initial Effect of DOI: 10.1038/srep45123 -
Vertrauen 0,7
“Text states tiny peaks around 946 cm-1 are IR characterization for MC.”
Substantial Proton Ion Conduction in Methylcellulose/Pectin/Ammonium Chloride Based Solid Nanocomposite Polymer Electrolytes: Effect of ZnO Nanofiller DOI: 10.3390/membranes12070706
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.