What absorbs at 731 cm⁻¹ in an FTIR spectrum?
A band near 731 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 5 cited sources
Schnelle Antwort
A band near 731 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Chlorine | 1 | 1 | 1,0 |
| Fluorine (C-F) | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
Das Ranking spiegelt die gesammelte Literatur Evidenz wider, nicht eine einzelne maßgebliche Regel. Bestätigen Sie immer anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| ZnO | 731, 1400, 3430 | Acetate, Methacrylate, C-O single bond | 1 |
| ZnO nanoparticles | 731, 1219, 1726 | Methacrylate, Acetate, C-O single bond | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 731 cm⁻¹ is usually not enough for material identification by itself.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Hydroxyl (O-H) Vertrauen 1,0
“Unassociated hydroxyl peaks at 731 and 653 in Raman occurred in the compound”
Arjunan 等 - 2012 - Quantum chemical studies and vibrational analysis DOI: 10.1016/j.saa.2012.08.053 -
Vertrauen 1,0
“cm-1 Peaks below 900 are not usually interpreted because they represent too complex a 6 cm-1 structural signature, but the presence of a sharp and strong peak at 731 can be assigned to the presence of stretching mode of C-F bonds [28].”
Algarra 等 - 2018 - Enhanced electrochemical response of carbon quantu DOI: 10.1016/j.talanta.2017.09.082 -
Vertrauen 1,0
“chainsinparallelorperpendicularlytotheplaneofthechains[23].The 731cm-1 C-Cl peak at was found to emanate from the rocking of the (0%100%), targetingbothattheextremevaluesandalsotodetect,with bonds [56].”
Giannoukos 和 Salonitis - 2020 - Study of the mechanism of friction on functionally DOI: 10.1016/j.triboint.2019.105906 -
Water (H2O) Vertrauen 1,0
“The peaks at 731 650 1388 cm-1 are due to vibrations of free water molecules.”
Investigation of morphological, structural and electronic transformation of PVDF and ZnO/rGO/PVDF hybrid membranes DOI: 10.1007/s11082-023-04663-6 -
Acetate Vertrauen 1,0
“A intense band at about 1300-1000 dine-like structure (m2/g) BET surface area A 685 630 697 731 cm-1 corresponds to the stretching in C-O, C-O-C, O-H in Average pore width d (nm) 3.13 2.73 3.18 2.43 carboxylic acids, anhydrides, lactones, e”
Yang JiLiang 等 - 2013 - Effect of microstructure and surface chemistry in DOI: 10.1007/s11434-013-6040-7
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekunden einen vollständigen Interpretationsbericht – Peakzuweisungen mit Literaturzitaten, Bibliotheksübereinstimmungen und einer vertrauensbewerteten Evidenzkette.