What absorbs at 707 cm⁻¹ in an FTIR spectrum?
A band near 707 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 7 cited sources
Schnelle Antwort
A band near 707 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Metal oxygen | 2 | 2 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| S s | 1 | 1 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
Das Ranking spiegelt die gesammelte Literatur Evidenz wider, nicht eine einzelne maßgebliche Regel. Bestätigen Sie immer anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| Polystyrene | 707, 1020, 1600 | Aromatic ring | 1 |
| Polyethylene | 707, 1737, 1720 | Aromatic ring | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 707 cm⁻¹ is usually not enough for material identification by itself.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Carbohydrate Vertrauen 1,0
“cm-1 appeared at 1515.47 In the sludge, there was also a peak at 706.52 attributed to crystalline 1β polymorph cellulose from pulp [17].”
Hidayani 等 - 2022 - Acoustic and Mechanical Properties of Polystyrene DOI: 10.37358/Mat.Plast.1964 -
S s Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Tasci 等 - 2016 - Determination of alliin and allicin in the plant o DOI: 10.17660/ActaHortic.2016.1143.19 -
Metal oxygen Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Crocella 等 - 2012 - On the Role of Morphology of CoFeO4 Spinel in Meth DOI: 10.1021/jp304355d -
Metal oxygen Vertrauen 1,0
“300×g 25°C, minutes at at decanted into PBS, and then Cu-Ti-O has a metal-oxygen stretching vibration of 707, 587, dissolved in 1mL 70 percent ethanol (ice cold).”
Elderdery 等 - 2022 - CuO-TiO2-Chitosan-Berbamine Nanocomposites Induce DOI: 10.1155/2022/9602725 -
Alkene (C=C) Vertrauen 1,0
“cm-1 Moreover, the peak at 1269.04 represents the C-O stretch of the carboxylic acid group cm-1 attached to the benzene ring, while the peak at 706.59 shows C=C stretching of”
Biodegradation of Azo Dye Methyl Red by Pseudomonas aeruginosa: Optimization of Process Conditions DOI: 10.3390/ijerph19169962 -
Vertrauen 1,0
“11(b)], the contents of Fe, O, Ca, C and Bouanis shows that the peak at BE 706.65 eV approx.”
Effectiveness Protection Performance of an Internal Blending Organic Corrosion Inhibitor for Carbon Steel in Chloride Contaminated Simulated Concrete Pore Solution DOI: 10.3151/jact.18.116 -
Vertrauen 0,8
“Explicit assignment in text.”
Phytochemical screening, polyphenols, flavonoids and tannin content, antioxidant activities and FTIR characterization of Marrubium vulgare L. from 2 different localities of Northeast of Morocco DOI: 10.1016/j.heliyon.2020.e05609
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekunden einen vollständigen Interpretationsbericht – Peakzuweisungen mit Literaturzitaten, Bibliotheksübereinstimmungen und einer vertrauensbewerteten Evidenzkette.