Was absorbiert bei 673 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 673 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 673 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Borate | 1 | 1 | 1,0 |
| Chlorine | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| C-S single bond | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Bronsted acid site | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 0 | 1,0 |
| Silicon (Si) | 1 | 0 | 1,0 |
| Alkyl C-H | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 673 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Bronsted acid site Vertrauen 1,0
“The increase in wavenum1500, 1576, and 1604 While both monodentate nitrates cm-1, ber of this peak at temperatures above 423 K can be interpreted s(NH 3) may be overlapping to form the peak at 1245 and (cid:228) as the desorption of NH from”
Pena 等 - 2004 - Identification of surface species on titania-suppo DOI: 10.1021/jp0313122 -
Carbonyl (C=O) Vertrauen 1,0
“Since these bands were stable toward evacuation at 673 cm-1) (together with a component around 2155 decreased in frequency)58 K (which is not typical of carbonyl bands at this 13CO concert (note that at very high coverages the satellite of”
Penkova 等 - 2007 - Effect of the preparation method on the state of n DOI: 10.1021/jp071927p -
C-S single bond Vertrauen 1,0
“It is also noticed from the cm-1 1100 figure that the intensity of the CdTe peak decreases and the existence of C-S stretching vibracm-1, with the annealing temperature (shown in Figure S6) tions is indicated by the bands at 673 respecwhich”
A novel CdTe ink-assisted direct synthesis of CdTe thin films for the solution-processed CdTe solar cells DOI: 10.1007/s10853-020-04578-7 -
Ring structure Vertrauen 1,0
“The appearance of a new peak at 673 in case of photo-degraded samples indicates the aromatization of PFA ring.”
Singh 等 - 2022 - Degradation of Polyfurfuryl Alcohol-Based Biopolym DOI: 10.21203/rs.3.rs-546187/v1 -
Vertrauen 1,0
“565.7 in The strong intensity absorption peaks at 672.6 are due to the stretching vibration of the Ni-Cl bond in complex 2.”
Structures, Characterization and DFT Studies of Four Novel Nickel Phenanthroline Complexes DOI: 10.3390/cryst13050738 -
Vertrauen 1,0
“However, with the cm-1 exception of a small band at 673 (S-O bend), no other characteristic absorption for sulfates can be seen;”
Assessment of Easily Accessible Spectroscopic Techniques Coupled with Multivariate Analysis for the Qualitative Characterization and Differentiation of Earth Pigments of Various Provenance DOI: 10.3390/min12060755 -
Vertrauen 1,0
“hyd [3b, 3e] cm-1 The NRVS features in the 400-600 range, having weaker intensities and higher vibrational energies than the Fe-S bands, are mostly from modes with Fe-CN/CO character, previously.[13] as reported cm-1, At still higher energi”
Terminal Hydride Species in [FeFe]-Hydrogenases are Vibrationally Coupled to the Active Site Environment DOI: 10.1002/anie.201805144. -
Borate Vertrauen 1,0
“IR band positions observed 673 in BCAPM glasses indicates cm1 the elongations of B-O-B bonds in BO units groups[36].”
Rajesham 等 - 2022 - Synthesis, physical, optical and structural studie DOI: 10.21203/rs.3.rs-1495935/v1
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.