What absorbs at 584 cm⁻¹ in an FTIR spectrum?
A band near 584 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Quick answer
A band near 584 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Metal oxygen | 9 | 9 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
Das Ranking spiegelt die gesammelte Literatur Evidenz wider, nicht eine einzelne maßgebliche Regel. Bestätigen Sie immer anhand Ihres Probenkontexts.
Possible materials
| Material | Unterstützende Peaks | Overlapping groups | Zitierte Quellen |
|---|---|---|---|
| Fe3O4 | 584, 2358, 1673 | Metal oxygen, Amide, N h | 2 |
| ZnO | 584, 1400, 3430 | Metal oxygen, Amide | 1 |
| magnetite | 584, 1740, 1263 | Metal oxygen | 1 |
| Fe3O4 nanoparticles | 584, 1673, 1470 | Metal oxygen, N h, Amide | 1 |
| polyaniline | 584, 1565, 1570 | Amide | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 584 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Literatur hinter diesen Zuweisungen
-
Vertrauen 1,0
“The second absorption band was found to be at 584 which is attributed to the vibrating bond of Fe-O in the Fe 3O 4.”
Formulation and Characterization of Fe3O4@PEG Nanoparticles Loaded Sorafenib; Molecular Studies and Evaluation of Cytotoxicity in Liver Cancer Cell Lines DOI: 10.3390/polym15040971 -
Vertrauen 1,0
“nanoparticles prepared by Tamilselvi et al (2013) contained major calcination temperature Hakimeh Mirzaei et al (2012) used FTIR transmission peaks at 449 cm-1, 511 cm-1, 584 cm-1 and 671 microwave irradiation in a sol-gel method to synthes”
Jeevanandam 等 - 2017 - Biosynthesis and characterization of MgO nanoparti DOI: 10.1039/C6NJ03176E. -
Metal oxygen Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
High yield, facile aqueous synthesis and characterization of C18 functionalized iron oxide nanoparticles DOI: 10.1088/2053-1591/2/4/045014 -
Vertrauen 1,0
“The peaks at 3433 is corresponds to N H 738, 584, 509 & 422 cm-1 is for stretching vibration of C C bonds of quiniod rings, stretching vibration 1556 04 14:53 at Laval] [Universite by Downloaded Figure 1.”
Patil 等 - 2011 - Electrical Conductivity of PolyanilineNiZnO3 Comp DOI: 10.1080/00150193.2011.620836 -
Metal oxygen Vertrauen 1,0
“The FTIR spectra reveals the bands for metal oxygen stretching which 584cm-1 540cm-1 ranges from to forms the tetrahedral shape.”
Equilibrium synthesis and magnetic properties of BaFe12O19 /NiFe2O4nanocomposite prepared by co precipitation method DOI: 10.1016/j.jksus.2019.12.019 -
Vertrauen 1,0
“The Fe 3O spectra showed a new absorption at the 584 that is known to arise from 4 Fe-O vibration [6].”
Cahyana 和 Reza - 2018 - Synthesis and Characterization of Fe3O4 Nanopartic DOI: 10.1063/1.5082452 -
Vertrauen 1,0
“The Raman peak at 584 belongs to ordinated by oxygen atoms.”
The photocatalytic degradation of a binary textile dyes mixture within a new configuration of loop reactor using ZnO thin film-phytotoxicity control DOI: 10.5802/crchim.198 -
Vertrauen 1,0
“Bands at 2928 and 2858/cm are associated with symmetric and anti-symmetric stretching vibrations of the chain33, 3411/cm33, carbon while the O-H stretching vibration may be related to the bands around 3417 and also vibrations34, the band at”
Acid red 18 removal from aqueous solution by nanocrystalline granular ferric hydroxide (GFH); optimization by response surface methodology & genetic-algorithm DOI: 10.1038/s41598-022-08769-x
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekunden einen vollständigen Interpretationsbericht – Peakzuweisungen mit Literaturzitaten, Bibliotheksübereinstimmungen und einer vertrauensbewerteten Evidenzkette.