What absorbs at 541 cm⁻¹ in an FTIR spectrum?
A band near 541 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 5 cited sources
Quick answer
A band near 541 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
可能的官能团归属
| 官能团 | 支持性事实 | 引用来源 | 最高置信度 |
|---|---|---|---|
| Metal oxygen | 2 | 2 | 1.0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1.0 |
| Methoxy (OCH3) | 1 | 1 | 1.0 |
| Methacrylate | 1 | 1 | 1.0 |
| C-O single bond | 1 | 1 | 1.0 |
| Acetate | 1 | 1 | 1.0 |
| Hydroxyl (O-H) | 1 | 1 | 1.0 |
排名反映了累积的文献证据，而非单一的权威规则。请始终对照您的样品背景进行确认。
Possible materials
| 材料 | 支持峰 | Overlapping groups | 引用来源 |
|---|---|---|---|
| polystyrene | 541, 1020, 1600 | Methacrylate, Methoxy (OCH3) | 1 |
| CeO2 | 541, 1554, 1630 | Methacrylate, Methoxy (OCH3), Metal oxygen | 1 |
| kaolinite | 541, 3696, 693 | Silicon-oxygen (Si-O), Metal oxygen | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 541 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
这些分配背后的文献
-
Metal oxygen 置信度 1.0
“Finally, the peak cm-1 appearing at 541.42 in the nanocomposites is clearly associated with Ce-O suggesting homogenous incorporation of CeO NPs into the co-polymer's matrices.”
Synthesis, Optical, Chemical and Thermal Characterizations of PMMA-PS/CeO2 Nanoparticles Thin Film DOI: 10.3390/polym13071158 -
Hydroxyl (O-H) 置信度 1.0
“0.75 541.27 cm-1 spectra in the region 3436-3450 belong to O-H Conclusions stretching vibrations.”
Gowda 和 Eraiah - 2013 - Synthesis and Structural Studies Of Praseodymium D DOI: 10.1063/1.4791162 -
Metal oxygen 置信度 1.0
“significant spin-orbit shrinkage plays a role in the splittingof Ce2p cm(cid:1)1 Ce-O peak at 541 is due to the characteristic stretching of state [17,18].”
Investigation on the structural properties of CeO2 nanofibers via CTAB surfactant DOI: 10.1016/j.matlet.2015.07.099 -
Acetate 置信度 1.0
“This comparison identifies the 1 541cm-1 of combinations of Mn C stretching and Mn C O bending band as an A mode, and the band as an E mode.”
Mahmood 等 - 2006 - Comparative vapour phase FTIR spectra and vibratio DOI: 10.1016/j.saa.2005.11.024 -
置信度 1.0
“Si-O-Al stretching 541 529 520 528 520 530 530 3.2 FTIR Spectroscopy The IR spectra for the <2 µm kaolin fraction from Awo-”
Oyebanjo 等 - 2018 - Mineral Constituents and Kaolinite Crystallinity o DOI: 10.1515/geo-2018-0012
是否有此波段的光谱？
上传您的FTIR光谱，几秒钟内即可获得完整的解读报告——包含带文献引用的峰分配、库匹配和带有置信度评级的证据链。