What absorbs at 541 cm⁻¹ in an FTIR spectrum?
A band near 541 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 5 cited sources
Quick answer
A band near 541 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Attributions possibles de groupes fonctionnels
| Groupe fonctionnel | Faits à l＇appui | Sources citées | Confiance maximale |
|---|---|---|---|
| Metal oxygen | 2 | 2 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
Le classement reflète les preuves bibliographiques accumulées, et non une règle faisant autorité. Confirmez toujours dans le contexte de votre échantillon.
Possible materials
| Matériel | Pics de support | Overlapping groups | Sources citées |
|---|---|---|---|
| polystyrene | 541, 1020, 1600 | Methacrylate, Methoxy (OCH3) | 1 |
| CeO2 | 541, 1554, 1630 | Methacrylate, Methoxy (OCH3), Metal oxygen | 1 |
| kaolinite | 541, 3696, 693 | Silicon-oxygen (Si-O), Metal oxygen | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 541 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Bibliographie derrière ces attributions
-
Metal oxygen confiance 1,0
“Finally, the peak cm-1 appearing at 541.42 in the nanocomposites is clearly associated with Ce-O suggesting homogenous incorporation of CeO NPs into the co-polymer's matrices.”
Synthesis, Optical, Chemical and Thermal Characterizations of PMMA-PS/CeO2 Nanoparticles Thin Film DOI: 10.3390/polym13071158 -
Hydroxyl (O-H) confiance 1,0
“0.75 541.27 cm-1 spectra in the region 3436-3450 belong to O-H Conclusions stretching vibrations.”
Gowda 和 Eraiah - 2013 - Synthesis and Structural Studies Of Praseodymium D DOI: 10.1063/1.4791162 -
Metal oxygen confiance 1,0
“significant spin-orbit shrinkage plays a role in the splittingof Ce2p cm(cid:1)1 Ce-O peak at 541 is due to the characteristic stretching of state [17,18].”
Investigation on the structural properties of CeO2 nanofibers via CTAB surfactant DOI: 10.1016/j.matlet.2015.07.099 -
Acetate confiance 1,0
“This comparison identifies the 1 541cm-1 of combinations of Mn C stretching and Mn C O bending band as an A mode, and the band as an E mode.”
Mahmood 等 - 2006 - Comparative vapour phase FTIR spectra and vibratio DOI: 10.1016/j.saa.2005.11.024 -
confiance 1,0
“Si-O-Al stretching 541 529 520 528 520 530 530 3.2 FTIR Spectroscopy The IR spectra for the <2 µm kaolin fraction from Awo-”
Oyebanjo 等 - 2018 - Mineral Constituents and Kaolinite Crystallinity o DOI: 10.1515/geo-2018-0012
Avez-vous un spectre avec cette bande ?
Téléchargez votre spectre FTIR et obtenez un rapport d＇interprétation complet — attributions de pics avec citations bibliographiques, correspondances de bibliothèque et une chaîne de preuves avec évaluation de la confiance — en quelques secondes.