Was absorbiert bei 537 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 537 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 537 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Metal oxygen | 4 | 4 | 1,0 |
| Silicon-oxygen (Si-O) | 2 | 2 | 1,0 |
| Silicon (Si) | 2 | 2 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Sulfonate | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| PMMA | 537, 1722, 1383 | Alkyl C-H | 1 |
| pectin | 537, 1746, 1150 | Alkyl C-H | 1 |
| copper oxide | 537, 624, 1686 | Metal oxygen, Alkyl C-H | 1 |
| rGO | 537, 2358, 2930 | Alkyl C-H | 1 |
| lignin | 537, 1035, 1510 | Alkyl C-H | 1 |
| wood | 537, 1740, 1730 | Alkyl C-H | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 537 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Carbonyl (C=O) Vertrauen 1,0
“In the O 1s scan of PAA the peak at 537 eV was attributed to the presence of carbonyl and hydroxyl groups of the carboxylic group as shown in Fig.”
Fareed 和 Stamboulis - 2014 - Nanoclays reinforced glass ionomer cements disper DOI: 10.1007/s10856-013-5058-3 -
Vertrauen 1,0
“cm-1 peak at 537 develops due to the Cu-O stretching which corresponds to the B mode [35].”
Rapid analyses of stress of copper oxide nanoparticles on wheat plants at an early stage by laser induced fluorescence and attenuated total reflectance Fourier transform infrared spectroscopy DOI: 10.1016/j.vibspec.2017.06.004 -
Vertrauen 1,0
“cm-1 at 422 and 410 The increase in the intensity of the absorption band at 537 could be attributed to an incorporation of zinc ions in the tetrahedral site depending on the preference of these ions for this site.”
Effects of Zinc Substitution on the Microstructural and Magnetic Characteristics of Cubic Symmetry Nickel Ferrite System DOI: 10.3390/sym15050975 -
Vertrauen 1,0
“The peak at 910 corresponded to the bending vibrations of the cm-1 The peaks at 537 and 467 corresponded to the deformation vibrations of the Al-O-Si”
Enhancing the Thermal Stability of Ionogels: Synthesis and Properties of Triple Ionic Liquid/Halloysite/MCC Ionogels DOI: 10.3390/molecules26206198 -
Sulfonate Vertrauen 1,0
“The peaks for SO3 bending and rocking were obtained at 537 cm-1 and 413 cm-1, 3 cm-1, 413 respectively [16].”
Anis 等 - 2023 - Studies on Polybenzimidazole and Methanesulfonate DOI: 10.3390/polym15132821 -
Vertrauen 1,0
“- the appearance of new bands from 1115 (of high intensity) and 537 cm-1 were assigned to silica and other oxides from FA, as seen in Figure 3.”
The Influence of Fly Ash on the Mechanical Properties of Water Immersed All Waste Composites DOI: 10.3390/polym14101957 -
Amide Vertrauen 1,0
“cm(cid:5)1 cm(cid:5)1 and 607.7 stretching, and absorption bands between 1479.1 TheFTIRspectrumwasusedtoidentifythefunctionalgroupofactive cm(cid:5)1 are characteristic of the amide II region and bands from 536.9 to componentsbasedonthepeak”
Phytochemical screening, polyphenols, flavonoids and tannin content, antioxidant activities and FTIR characterization of Marrubium vulgare L. from 2 different localities of Northeast of Morocco DOI: 10.1016/j.heliyon.2020.e05609 -
Vertrauen 1,0
“The rGO (rGO) impregnated with magnetic Fe 3O showed an 4 cm-1", additional peak at "537 which gives a clear identification of the Fe-O-Fe bond [37].”
Fabrication of MNPs/rGO/PMMA Composite for the Removal of Hazardous Cr(VI) from Tannery Wastewater through Batch and Continuous Mode Adsorption DOI: 10.3390/ma14226923
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.