What absorbs at 496 cm⁻¹ in an FTIR spectrum?

Quick answer

A band near 496 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.

可能性のある官能基アサイン

ランキングは蓄積された文献証拠を反映しており、単一の権威あるルールではありません。常にサンプルのコンテキストと照合して確認してください。

Possible materials

Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.

Spectrum logic

This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 496 cm⁻¹ is usually not enough for material identification by itself.

Real-world usage

This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.

Common mistakes

• Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
• Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
• Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.

Verification advice

When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.

これらのアサインの根拠となる文献

• Silicon (Si) 信頼度 1.0

  “The peaks at 496 cm-1 225 corresponding to Si-O vibrations, were shifted from 496 to higher frequencies cm-1, cm-1”

  Investigating the effect of carbon nanotube on early age hydration of cementitious composites with isothermal calorimetry and Fourier transform infrared spectroscopy DOI: 10.1016/j.cemconcomp.2020.103513
• Acetate 信頼度 1.0

  “511 pollutantswillbecomeincreasingly prominent in PRD regions wavenumbers of ~690, ~760 and ~890/cm as well as SOC C_O 495 512 andevenChinaso that alleviatingN load in aerosolis in great concentration correlated with absorption peak heights”

  Yu 等 - 2018 - Fast screening compositions of PM2.5 by ATR-FTIR DOI: 10.1016/j.jes.2017.11.021
• 信頼度 1.0

  “The peaks at 576 496cm-1 are attributed to Cu-O vibrations confirming and Compressive strength of the samples is measured according the phosphate-copper interaction [27].”

  Thermal, mechanical and electrical properties of lithium phosphate glasses doped with copper oxide DOI: 10.1007/s12034-019-1897-y
• Silicon-oxygen (Si-O) 信頼度 1.0

  “with the same electrode heated up to Pristine silicon electrode dominantroleofP-FcontainingspeciesinSEIofSi-basedelectrodes gives bands corresponding to O-Si-O and Si-O-Si vibrations (1217, reported.36,37 is 1109,883,496cm-1)andtoNaCMC(1598”

  Profatilova 等 - 2012 - Thermally Induced Reactions between Lithiated Nano DOI: 10.1149/2.095205jes
• 信頼度 1.0

  “The bands at 496 could be attributed to the stretching vibration of Mg-O [31].”

  Rapid Synthesis of Asymmetric Methyl-Alkyl Carbonates Catalyzed by -KMgPO4 in a Sealed-Vessel Reactor Monowave 50 DOI: 10.3390/catal11040499
• Metal oxygen 信頼度 0.8

  “Absorption band assigned to ZnO stretching”

  Muzaffar 等 - 2020 - Microwave assisted tuning of optical and magnetic DOI: 10.1007/s10971-020-05290-3