What absorbs at 492 cm⁻¹ in an FTIR spectrum?
A band near 492 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 5 cited sources
Câu trả lời nhanh
A band near 492 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Gán nhóm chức có thể
| Nhóm chức | Sự kiện hỗ trợ | Nguồn tham khảo | Độ tin cậy cao nhất |
|---|---|---|---|
| Metal oxygen | 1 | 1 | 1,0 |
| S s | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
Xếp hạng phản ánh bằng chứng tài liệu tích lũy, không phải một quy tắc duy nhất có thẩm quyền. Luôn xác nhận với ngữ cảnh mẫu của bạn.
Vật liệu có thể
| Vật liệu | Các đỉnh hỗ trợ | Các nhóm chồng chéo | Nguồn tham khảo |
|---|---|---|---|
| magnetite | 492, 1740, 1263 | Metal oxygen, Methacrylate, Methoxy (OCH3) | 1 |
Vật liệu chỉ được hiển thị khi cùng một nhóm tài liệu hỗ trợ dải này và ít nhất một đỉnh đặc trưng bổ sung.
Logic phổ
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 492 cm⁻¹ is usually not enough for material identification by itself.
Sử dụng thực tế
Loại truy vấn này phổ biến trong việc xác định polyme, sàng lọc nhựa chưa xác định, xử lý sự cố QC, xác minh vật liệu tái chế và đánh giá gán đỉnh dựa trên tài liệu.
Các lỗi thường gặp
- Xem xét một dải đơn lẻ như bằng chứng của một vật liệu mà không kiểm tra ít nhất một hoặc hai đỉnh hỗ trợ.
- Bỏ qua chồng lấn: nhiều nhóm chức có thể đóng góp gần cùng một số sóng.
- Bỏ qua xác nhận khi các chất phụ gia, hỗn hợp, quá trình oxy hóa hoặc nhiễm bẩn có thể làm méo phổ.
Lời khuyên xác minh
Khi vẫn còn sự mơ hồ, hãy xác thực giả thuyết bằng DSC, GC-MS hoặc TGA, đặc biệt đối với hỗn hợp, mẫu suy thoái và polyme độn.
Tài liệu tham khảo đằng sau các gán này
-
Silicon-oxygen (Si-O) độ tin cậy 1,0
“The studied quartz was detected with bands at 460.90 cm-1, 491.73 cm-1, 773.68 cm-1, and 1071.43 cm-1.”
Fawzy - 2021 - Separation of fine beryl from quartz via magnetic DOI: 10.37190/ppmp/132329 -
Hydroxyl (O-H) độ tin cậy 1,0
“The broad bands at around 3,416, 1,619, 1,181 cm-1 and 492 are the results of the stretching vibration of -OH, C¼C C¼O, C-C C-O S-S or or and functionalities, respectively.”
Liu 等 - 2018 - Preparation, adsorptive properties and chemical re DOI: 10.2166/wh.2018.068 -
độ tin cậy 1,0
“As shown in Figure 9, the peaks at 505 cm-1 and 492 cm-1 correspond to the vibration cm-1 cm-1 As shown in Figure 9, the peaks at 505 and 492 correspond to the vibration of of Fe-O bonds [51], which further confirmed the successful loading”
Adsorption Characteristics of Heavy Metals Pb2+ and Zn2+ by Magnetic Biochar Obtained from Modified AMD Sludge DOI: 10.3390/toxics11070590 -
độ tin cậy 0,9
“Explicit assignment in text”
Molecular and biological activities of metal oxide-modified bioactive glass DOI: 10.1038/s41598-023-37017-z -
độ tin cậy 0,6
“Raman spectrum peak assigned to heterolytic rupture of AlCl oligomers”
Understanding the molecular structure of the elastic and thermoreversible AlCl3:urea/polyethylene oxide gel electrolyte DOI: 10.1002/cssc.202001557
Có phổ với dải này không?
Tải lên phổ FTIR của bạn và nhận báo cáo diễn giải đầy đủ — gán đỉnh với tài liệu tham khảo, kết quả so khớp thư viện và chuỗi bằng chứng xếp hạng độ tin cậy — trong vài giây.