What absorbs at 476 cm⁻¹ in an FTIR spectrum?
A band near 476 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 6 cited sources
Câu trả lời nhanh
A band near 476 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Gán nhóm chức có thể
| Nhóm chức | Sự kiện hỗ trợ | Nguồn tham khảo | Độ tin cậy cao nhất |
|---|---|---|---|
| C-O single bond | 2 | 2 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Metal oxygen | 1 | 1 | 0,95 |
Xếp hạng phản ánh bằng chứng tài liệu tích lũy, không phải một quy tắc duy nhất có thẩm quyền. Luôn xác nhận với ngữ cảnh mẫu của bạn.
Vật liệu có thể
| Vật liệu | Các đỉnh hỗ trợ | Các nhóm chồng chéo | Nguồn tham khảo |
|---|---|---|---|
| Cellulose | 476, 1735, 1650 | Acetate, Methacrylate, C-O single bond | 1 |
Vật liệu chỉ được hiển thị khi cùng một nhóm tài liệu hỗ trợ dải này và ít nhất một đỉnh đặc trưng bổ sung.
Logic phổ
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 476 cm⁻¹ is usually not enough for material identification by itself.
Sử dụng thực tế
Loại truy vấn này phổ biến trong việc xác định polyme, sàng lọc nhựa chưa xác định, xử lý sự cố QC, xác minh vật liệu tái chế và đánh giá gán đỉnh dựa trên tài liệu.
Các lỗi thường gặp
- Xem xét một dải đơn lẻ như bằng chứng của một vật liệu mà không kiểm tra ít nhất một hoặc hai đỉnh hỗ trợ.
- Bỏ qua chồng lấn: nhiều nhóm chức có thể đóng góp gần cùng một số sóng.
- Bỏ qua xác nhận khi các chất phụ gia, hỗn hợp, quá trình oxy hóa hoặc nhiễm bẩn có thể làm méo phổ.
Lời khuyên xác minh
Khi vẫn còn sự mơ hồ, hãy xác thực giả thuyết bằng DSC, GC-MS hoặc TGA, đặc biệt đối với hỗn hợp, mẫu suy thoái và polyme độn.
Tài liệu tham khảo đằng sau các gán này
-
độ tin cậy 1,0
“identifiable associated with ferrocene groups are clearly in cm-1 Figure 1 (red curve, in the middle): the band at 476 As XPS gives the relative chemical composition of surfaces at a corresponds to Fe-C stretching modes, while the ones 1-10”
Al Dine 等 - 2019 - Self-Limited Grafting of Sub-Monolayers via Diels- DOI: 10.1021/acsomega.9b02391 -
Acetate độ tin cậy 1,0
“In addition, the peak at 475.65cm-1 fulfils the requirement of manufacturer for application in indicates the presence of C-O-C bending in both construction and automotive industries.”
Sahari 和 Maleque - 2016 - Mechanical Properties of Oil Palm Shell Composites DOI: 10.1155/2016/7457506 -
Metal oxygen độ tin cậy 0,95
“Explicit assignment in text: 'peaks of 476 and 547 indicating the presence of MgO and MnO2'”
Othman 等 - 2017 - Physicochemical properties and methane adsorption DOI: 10.5714/CL.2017.24.082 -
độ tin cậy 0,9
“Explicit assignment: 'sharp band at 476 cm-1 ascribed to Se bonding'”
Vidhya 等 - 2020 - Energy storage performance of CoNiSe2 nanostructur DOI: 10.1016/j.matlet.2020.128485 -
C-O single bond độ tin cậy 0,9
“explicit assignment”
Barzic 等 - 2022 - Cellulose derivativebarium titanate composites wi DOI: 10.21203/rs.3.rs-467926/v1 -
độ tin cậy 0,8
“Assigned as internal mode in text.”
Nabiyev 等 - 2018 - Structural Studies of dielectric HDPE+ZrO2 polymer DOI: 10.1088/1742-6596/994/1/012011
Có phổ với dải này không?
Tải lên phổ FTIR của bạn và nhận báo cáo diễn giải đầy đủ — gán đỉnh với tài liệu tham khảo, kết quả so khớp thư viện và chuỗi bằng chứng xếp hạng độ tin cậy — trong vài giây.