What absorbs at 416 cm⁻¹ in an FTIR spectrum?
A band near 416 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 3 cited sources
Quick answer
A band near 416 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Possíveis atribuições de grupos funcionais
| Grupo funcional | Fatos de suporte | Fontes citadas | Maior confiança |
|---|---|---|---|
| Metal oxygen | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
A classificação reflete a evidência acumulada da literatura, não uma única regra autoritária. Sempre confirme com o contexto da sua amostra.
Possible materials
| Material | Picos de suporte | Overlapping groups | Fontes citadas |
|---|---|---|---|
| ZnO | 416, 1400, 3430 | Metal oxygen, Methacrylate, Methoxy (OCH3) | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 416 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Literatura por trás destas atribuições
-
Acetate confiança 1,0
“3 cm-1 cm-1 stretching vibration in the lipids/proteins, the C-O changes was obtained as follows: 1,033 > 1,416 cm-1 cm-1 cm-1.”
Hu 和 Yuan - 2018 - Responses of Chemical Functional Groups in Coleus DOI: 10.15244/pjoes/83613 -
Water (H2O) confiança 1,0
“The typical bands at 416 attributed to the bending mode of absorbed water [28,35].”
Rapid Bio-Assisted Synthesis and Magnetic Behavior of Zinc Oxide/Carbon Nanoparticles DOI: 10.3390/cryst13071081 -
confiança 0,7
“β-phase position.”
Enhanced dielectric and ferroelectric properties of PVDF-BiFeO3 composites in 0–3 connectivity DOI: 10.1016/j.jallcom.2017.04.310
Tem um espectro com esta banda?
Carregue seu espectro FTIR e obtenha um relatório de interpretação completo — atribuições de picos com citações da literatura, correspondências de biblioteca e uma cadeia de evidências com nível de confiança — em segundos.