What absorbs at 398 cm⁻¹ in an FTIR spectrum?
A band near 398 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 3 cited sources
إجابة سريعة
A band near 398 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
تعيينات المجموعات الوظيفية المحتملة
| مجموعة وظيفية | حقائق داعمة | المصادر المستشهد بها | أعلى ثقة |
|---|---|---|---|
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
يعكس الترتيب الأدلة الأدبية المتراكمة، وليس قاعدة واحدة موثوقة. تأكد دائمًا من سياق عينتك.
المواد المحتملة
| مادة | القمم الداعمة | المجموعات المتداخلة | المصادر المستشهد بها |
|---|---|---|---|
| lignin | 398, 1035, 1510 | Methacrylate, Acetate, C-O single bond | 1 |
| polyaniline | 398, 1565, 1570 | Methacrylate, Acetate | 1 |
| nanocomposites | 398, 1717, 1630 | C-O single bond, Methacrylate, Acetate | 1 |
| titanium dioxide | 398, 1716, 1724 | Methacrylate, Acetate | 1 |
تظهر المواد فقط عندما يدعم نفس مجموعة الأدبيات هذا النطاق وذروة مميزة إضافية واحدة على الأقل.
منطق الطيف
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 398 cm⁻¹ is usually not enough for material identification by itself.
الاستخدام في العالم الحقيقي
هذا النوع من الاستعلام شائع في تحديد البوليمر، وفحص البلاستيك غير المعروف، واستكشاف أخطاء مراقبة الجودة، والتحقق من المواد المعاد تدويرها، ومراجعة تعيين القمم المدعومة بالأدبيات.
الأخطاء الشائعة
- معالجة نطاق معزول واحد كدليل على المادة دون التحقق من ذروة داعمة واحدة أو اثنتين على الأقل.
- تجاهل التداخل: يمكن أن تساهم مجموعات وظيفية متعددة بالقرب من نفس رقم الموجة.
- تخطي التحقق من الصحة عندما قد تؤدي الإضافات أو الخلائط أو الأكسدة أو التلوث إلى تشويه الطيف.
نصيحة التحقق
عندما يبقى الغموض، تحقق من الفرضية باستخدام DSC أو GC-MS أو TGA، خاصة للمخاليط والعينات المتحللة والبوليمرات المملوءة.
الأدبيات وراء هذه التعيينات
-
Lignin الثقة 1,0
“Another peak at 398.1 eV should be attributed to the N in the -NHfor F-lignin@APP [35].”
Liang 等 - 2020 - Thermal Kinetics of a Lignin-Based Flame Retardant DOI: 10.3390/polym12092123 -
N h الثقة 1,0
“The first peak at 398.39 eV corresponded to neutral amines, the second peak at in Table 1.”
Bekhoukh 等 - 2021 - Development, Investigation, and Comparative Study DOI: 10.3390/polym13193344 -
Acetate الثقة 1,0
“397 the powder cellulose and the gel, which can be assigned to C-O stretching in 398 amorphous cellulose.”
Lefroy 等 - 2021 - A natural, cellulose-based microgel for water-in-o DOI: 10.1016/j.foodhyd.2020.106408
هل لديك طيف بهذه الحزمة؟
قم بتحميل طيف FTIR الخاص بك واحصل على تقرير تفسير كامل — تعيينات الذروة مع استشهادات الأدبيات، مطابقات المكتبة، وسلسلة أدلة مصنفة الثقة — في ثوانٍ.