What absorbs at 3655 cm⁻¹ in an FTIR spectrum?
A band near 3655 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 3 cited sources
Răspuns rapid
A band near 3655 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Atribuiri posibile ale grupelor funcționale
| Grup funcțional | Fapte suport | Surse citate | Încredere maximă |
|---|---|---|---|
| Hydroxyl (O-H) | 2 | 1 | 0,8 |
| Metal oxygen | 1 | 1 | 1,0 |
| Bronsted acid site | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
Clasamentul reflectă dovezile acumulate din literatură, nu o singură regulă autoritară. Confirmați întotdeauna în contextul mostrei dvs.
Materiale posibile
| Material | Vârfuri suport | Grupuri suprapuse | Surse citate |
|---|---|---|---|
| TiO2 | 3655, 1700, 1093 | Metal oxygen, Hydroxyl (O-H) | 1 |
| TiO | 3655, 1730, 1699 | Hydroxyl (O-H), Metal oxygen | 1 |
Materialele sunt afișate numai atunci când același grup de literatură susține această bandă și cel puțin un vârf caracteristic suplimentar.
Logica spectrului
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 3655 cm⁻¹ is usually not enough for material identification by itself.
Utilizare în condiții reale
Acest tip de interogare este comun în identificarea polimerilor, screeningul materialelor plastice necunoscute, depanarea QC, verificarea materialelor reciclate și revizuirea atribuirii vârfurilor bazată pe literatură.
Greșeli comune
- Tratarea unei benzi izolate ca dovadă a unui material fără a verifica cel puțin unul sau două vârfuri de susținere.
- Ignorând suprapunerea: mai multe grupuri funcționale pot contribui în apropierea aceluiași număr de undă.
- Omiterea validării atunci când aditivii, amestecurile, oxidarea sau contaminarea pot distorsiona spectrul.
Sfat de verificare
Când ambiguitatea rămâne, validați ipoteza prin DSC, GC-MS sau TGA, în special pentru amestecuri, probe degradate și polimeri umpluți.
Literatura din spatele acestor atribuiri
-
Water (H2O) încredere 1,0
“NO+ The weak band at 2159 indicates the formation of the nitrosonium ion cm-1 below).[15-16] exchanging Brønsted sites (see The very weak signal at 1380 (labelled with # in right hand panel) is related to the formation of a very small amoun”
Negri 等 - 2018 - Investigating the Low Temperature Formation of Cu- DOI: 10.1002/chem.201802769 -
Metal oxygen încredere 1,0
“The at a wave number of 802 cm-1, which are bonds formed in the framework of TiO2 2 cm-1 TiO spectrum showed intense peaks at 3655 and 3860 due to the stretching of the”
Physical Properties of Fast-Growing Wood-Polymer Nano Composite Synthesized through TiO2 Nanoparticle Impregnation DOI: 10.3390/polym14204463 -
Hydroxyl (O-H) încredere 0,8
“Attributed to hydroxyl stretching.”
Experimental study on the influence of water immersion on spontaneous combustion of anthracite with high concentrations of sulfur-bearing minerals DOI: 10.1007/s10973-019-09073-z
Aveți un spectru cu această bandă?
Încărcați spectrul FTIR și obțineți un raport complet de interpretare — atribuiri de peak-uri cu citări din literatură, potriviri cu biblioteca și un lanț de dovezi cu nivel de încredere — în câteva secunde.