What absorbs at 3626 cm⁻¹ in an FTIR spectrum?
Una banda cerca de 3626 cm⁻¹ puede apuntar a varios grupos funcionales. A continuación se muestran las asignaciones más probables, clasificadas por cuánta evidencia publicada respalda cada una — cada una trazable a literatura (DOI) y validada de forma cruzada con nuestros más de 130,000 espectros de referencia y grafo de conocimiento.
Backed by 5 cited sources
Quick answer
A band near 3626 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Posibles asignaciones de grupos funcionales
| Grupo funcional | Hechos de respaldo | Fuentes citadas | Confianza máxima |
|---|---|---|---|
| Hydroxyl (O-H) | 6 | 4 | 1,0 |
| Silanol (Si-OH) | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Silicate | 1 | 1 | 0,9 |
La clasificación refleja la evidencia acumulada de la literatura, no una única regla autorizada. Siempre confirme según el contexto de su muestra.
Possible materials
| Material | Supporting peaks | Overlapping groups | Fuentes citadas |
|---|---|---|---|
| activated carbon | 3626, 1575, 1210 | Hydroxyl (O-H) | 1 |
| clay | 3626, 1736, 2855 | Hydroxyl (O-H), Water (H2O) | 1 |
| CS | 3626, 1645, 1720 | Hydroxyl (O-H) | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 3626 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Literatura detrás de estas asignaciones
-
Hydroxyl (O-H) confianza 1,0
“be at 3498 and bonding change of Thr204 occurs without evident structural Secondary alcohols possess their O-H stretches at 3626-”
Kandori 等 - 2010 - Protein-Protein Interaction Changes in an Archaeal DOI: 10.1155/2010/424760 -
Hydroxyl (O-H) confianza 1,0
“Most of the changes in the spectrum of CuMt compared to the spectrum of the NaMt The characteristic absorption band of NaMt at 3626 cm-1 (Figure 2) is assigned to OH cm-1.”
Effect of Copper and Titanium-Exchanged Montmorillonite Nanostructures on the Packaging Performance of Chitosan/Poly-Vinyl-Alcohol-Based Active Packaging Nanocomposite Films DOI: 10.3390/foods10123038 -
Hydroxyl (O-H) confianza 1,0
“LLM confirmed rule peak-group candidate”
Sureshkumar 等 - 2020 - Continuous Phenol Removal Using a Liquid-Solid Cir DOI: 10.3390/en13153839 -
Hydroxyl (O-H) confianza 1,0
“The characteristic peak occurring at a frequency level of 3626 cm-1 indicated the O-H stretching in silanol (Si-OH) groups.”
Insights into Alkali-Acid Leaching of Sericite: Dissolution Behavior and Mechanism DOI: 10.3390/min7100196 -
Silicate confianza 0,9
“absorption bands at 3626 refer to stretching vibration of silicates”
Enhanced Coating Protection of C-Steel Using Polystyrene Clay Nanocomposite Impregnated with Inhibitors DOI: 10.3390/polym15020372
¿Tiene un espectro con esta banda?
Cargue su espectro FTIR y obtenga un informe de interpretación completo — asignaciones de picos con citas bibliográficas, coincidencias de librerías y una cadena de evidencia con calificación de confianza — en segundos.