What absorbs at 3469 cm⁻¹ in an FTIR spectrum?
A band near 3469 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 3 cited sources
Quick answer
A band near 3469 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mogelijke functionele-groeptoewijzingen
| Functionele groep | Ondersteunende feiten | Geciteerde bronnen | Hoogste vertrouwen |
|---|---|---|---|
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
Ranglijst weerspiegelt cumulatief literatuurbewijs, niet één gezaghebbende regel. Bevestig altijd aan de hand van uw monsterecontext.
Possible materials
| Materiaal | Ondersteunende pieken | Overlapping groups | Geciteerde bronnen |
|---|---|---|---|
| Cellulose | 3469, 1735, 1650 | Acetate, Methacrylate, C-O single bond | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 3469 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Literatuur achter deze toewijzingen
-
vertrouwen 1,0
“5B that three cm-1, cm-1 cm-1 3369 and 3242 in the spectra of amine stretching vibrations were observed at 3469 uncured prepregs.”
Aerospace composite cured by quickstep and autoclave processing techniques: Evaluation and comparison of reaction progress DOI: 10.1016/j.ast.2017.02.014. -
Hydroxyl (O-H) vertrouwen 1,0
“LLM confirmed rule peak-group candidate”
Polybenzoxazine Resins with Cellulose Phosphide: Preparation, Flame Retardancy and Mechanisms DOI: 10.3390/polym13244288 -
C c single bond vertrouwen 1,0
“1643 1281 1146 (1) 1039 2922 2985 Transmittance, cm-1 the case of ETMS (curve 1) the 1046 band was 3469 578 attributed to the C-C-O vibrations of C 2H 5OH [47].”
Rangelova 等 - 2011 - MethylcelluloseSiO2 hybrids sol-gel preparation DOI: 10.2478/s11532-010-0123-y
Heeft u een spectrum met deze band?
Upload uw FTIR-spectrum en ontvang binnen enkele seconden een volledig interpretatierapport — piektoewijzingen met literatuurverwijzingen, bibliotheekovereenkomsten en een met vertrouwen beoordeelde bewijsketen.