Was absorbiert bei 2889 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 2889 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 2889 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 7 | 7 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| polyethylene | 2889, 1737, 1720 | Alkyl C-H, Hydroxyl (O-H) | 1 |
| PVA | 2889, 1660, 2930 | Alkyl C-H, Hydroxyl (O-H), Amide | 1 |
| PEG | 2889, 1650, 1342 | Alkyl C-H, Hydroxyl (O-H) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 2889 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Alkyl C-H Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Burhan 等 - 2020 - Preparation of Cyperus diffusus Vahl cellulose-pol DOI: 10.1088/1757-899X/833/1/012063 -
Alkyl C-H Vertrauen 1,0
“FTIR peak cm-1 cm-1 centring at 3450 represents OH stretching and peak appearing at 2889 was due to C-H”
Niaz 等 - 2020 - Alginate-caseinate based pH-responsive nano-coacer DOI: 10.1016/j.ijbiomac.2019.11.177 -
Alkyl C-H Vertrauen 1,0
“cm-1, Figure 6 shows that the C-H aliphatic stretching band for PEO appears at 2889 and this peak Figure 6 shows that the C-H aliphatic stretching band for PEO appears at 2889 cm-1, and this different was shifted to lower wavenumbers upon b”
Preparation and Composition Optimization of PEO:MC Polymer Blend Films to Enhance Electrical Conductivity DOI: 10.3390/polym11050853 -
Alkyl C-H Vertrauen 1,0
“For the spectrum of PEG, the spectral band appeared at 3463 for cm-1 cm-1 O-H stretching vibrations, 2889 for C-H stretching vibrations, and 1469 and 1342 for C-H cm-1 bending vibrations.”
Green Synthesis and Characterization of Silver/Chitosan/Polyethylene Glycol Nanocomposites DOI: 10.3390/ijms12084872 -
Alkyl C-H Vertrauen 1,0
“The peak at 2889 is cm(cid:0) 1 C-H attributed to the medium stretching alkane confirming the presence of polysaccharides [41].”
Development and characterization of natural sourced bioplastic for food packaging applications DOI: 10.1016/j.heliyon.2023.e13538 -
Amide Vertrauen 1,0
“FTIR bands at 2945 and 2889 cm-1) peptide bond bands (amide I ~1640 and amide II ~1540 were not detected, suggesting that proteins are not related to mineral synthesis or their stabilization.”
Fragoso 等 - 2010 - Characterization of the CaCO3 biomineral in corall DOI: 10.7773/cm.v36i1.1606 -
Alkyl C-H Vertrauen 1,0
“The HSA NPs ◦C, 2889 cm-1 is related to the C-H bond, 1728 cm-1 corresponds to the C=O bond, 1462 cm-1 showed a characteristic endothermic peak at around 120 which probably corresponds indicates C=C, 1365 cm-1 is related to CH2 and C=C, and”
Human Serum Albumin Nanoparticles: Synthesis, Optimization and Immobilization with Antituberculosis Drugs DOI: 10.3390/polym15132774 -
Alkyl C-H Vertrauen 1,0
“cm-1 FTIR data of pure PL is characterized by principal absorption peaks at 2889 (C-H stretching cm-1”
Solid-state characterization of triamcinolone acetonide nanosuspensiones by X-ray spectroscopy, ATR Fourier transforms infrared spectroscopy and differential scanning calorimetry analysis DOI: 10.1016/j.ijpharm.2017.03.082
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.