What absorbs at 2364 cm⁻¹ in an FTIR spectrum?
A band near 2364 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 6 cited sources
Quick answer
A band near 2364 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
가능한 작용기 할당
| 작용기 | 지원 사실 | 인용 출처 | 최고 신뢰도 |
|---|---|---|---|
| Borate | 1 | 1 | 1.0 |
| Carbon dioxide | 1 | 1 | 1.0 |
| Hydroxyl (O-H) | 1 | 1 | 1.0 |
| Water (H2O) | 1 | 1 | 1.0 |
| Aromatic ring | 1 | 1 | 1.0 |
| Methoxy (OCH3) | 1 | 1 | 1.0 |
| Methacrylate | 1 | 1 | 1.0 |
| C-O single bond | 1 | 1 | 1.0 |
| Acetate | 1 | 1 | 1.0 |
| Secondary amine | 1 | 0 | 1.0 |
| N h | 1 | 0 | 1.0 |
순위는 단일 권위 규칙이 아닌 축적된 문헌 증거를 반영합니다. 항상 샘플 상황에 대해 확인하세요.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 2364 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
이 할당의 배경이 되는 문헌
-
Acetate 신뢰도 1.0
“7c, partial decomposition of C-O bands at 2364 preparing the oxide materials, and are associated with metal oxide and cm-1 may describe the bonds in the octahedra sites [44,51].”
Low-temperature synthesis of Sr2FeMoO6 double perovskite; structure, morphology, and magnetic properties DOI: 10.1016/j.ceramint.2020.03.264 -
Aromatic ring 신뢰도 1.0
“The weak bands at 2364 and of aromatic ring comand sharp strong peak at pound.”
Olajire 和 Mohammed - 2020 - Green synthesis of nickel oxide nanoparticles and DOI: 10.1016/j.apt.2019.10.012 -
Water (H2O) 신뢰도 1.0
“Also, SeH weak bands associated with vibrations are also seen in the glass cm-1and~2332 cm-1.Inaddition,thebandabout samples at~2364 cm-1 ~1640 is observed which is related to the presence of water absorbed from air whilepelletizing samples”
Sharma 等 - 2017 - Impact of CuS on the crystallization kinetics of N DOI: 10.1016/j.jnoncrysol.2017.09.046 -
Hydroxyl (O-H) 신뢰도 1.0
“band at 871 and broad band at 1414 This characteristic doublet recorded between cm-1 2334 and 2364 can be assigned to the stretching vibration of OH groups, and explained B.”
Colovic 等 - 2013 - Creating of Highly Active Calcium-Silicate Phases DOI: 10.2298/SOS1303341C -
Carbon dioxide 신뢰도 1.0
“cm(cid:3)1 cm(cid:3)1) 2390-2250 tion bands in the (maxima at 2364 and 730-590cm(cid:3)1(maxima at669cm(cid:3)1) regionswere characteristic on bands of CO 2.”
Surface hardness and flammability of Na2SiO3 and nano-TiO2 reinforced wood composites DOI: 10.1039/c9ra05200c -
Borate 신뢰도 1.0
“2371.2cm-1, trigonal The peaks at 2364.5 to are due to B-O symmetric stretching vibration in BO units from Pyro 3 bands15.”
Takai 等 - 2019 - Gamma Ray and FTIR Studies in Zinc Doped Lead Bora DOI: 10.1590/1980-5373-MR-2018-0404
이 밴드가 있는 스펙트럼이 있나요?
FTIR 스펙트럼을 업로드하면 몇 초 안에 전체 해석 보고서(문헌 인용이 포함된 피크 할당, 라이브러리 매칭, 신뢰도 평가 증거 체인)를 받을 수 있습니다.