What absorbs at 2347 cm⁻¹ in an FTIR spectrum?
A band near 2347 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 2 cited sources
Quick answer
A band near 2347 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Possíveis atribuições de grupos funcionais
| Grupo funcional | Fatos de suporte | Fontes citadas | Maior confiança |
|---|---|---|---|
| Alkene (C=C) | 2 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Carbon dioxide | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 0 | 1,0 |
| Methoxy (OCH3) | 1 | 0 | 1,0 |
| Methacrylate | 1 | 0 | 1,0 |
| C-O single bond | 1 | 0 | 1,0 |
| Acetate | 1 | 0 | 1,0 |
| Metal oxygen | 1 | 0 | 1,0 |
A classificação reflete a evidência acumulada da literatura, não uma única regra autoritária. Sempre confirme com o contexto da sua amostra.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 2347 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Literatura por trás destas atribuições
-
Carbon dioxide confiança 1,0
“LLM confirmed rule peak-group candidate”
CO oxidation and 4-nitrophenol reduction over ceria-promoted platinum nanoparticles impregnated with ZSM-5 zeolite DOI: 10.1016/j.jre.2021.07.009 -
Alkene (C=C) confiança 1,0
“PS concentration: 0.42 mM, pH: 5, CIP: 20 mg/L, MA and TBA concentration: 200 mM and time: 20 min) OH and NH stretching modes with aliphatic C-H, C-H cm-1, cm-1, stretching at > 3000 C=O stretching at 1633 cm-1 multiple bands at 1517 for C=”
Ciprofloxacin removal by electro-activated persulfate in aqueous solution using iron electrodes DOI: 10.1007/s13201-019-1024-7
Tem um espectro com esta banda?
Carregue seu espectro FTIR e obtenha um relatório de interpretação completo — atribuições de picos com citações da literatura, correspondências de biblioteca e uma cadeia de evidências com nível de confiança — em segundos.