Silicon-oxygen (Si-O) — FTIR-Absorptionspeaks und Zuordnungen
Dies sind die charakteristischen FTIR-Wellenzahlen, bei denen Silicon-oxygen (Si-O) tendenziell absorbiert. Sie wurden aus veröffentlichter Literatur zusammengestellt und nach der unterstützenden Evidenz geordnet. Jede Zuordnung ist bis zu einer Quelle (DOI) rückverfolgbar und wurde anhand unserer 320,000+ Referenzspektren und unseres Wissensgraphen kreuzvalidiert.
Gestützt durch 8 zitierte Quellen
Schnelle Antwort
Silicon-oxygen (Si-O) wird normalerweise durch die Suche nach einem wiederkehrenden Cluster charakteristischer Peaks zugeordnet, nicht nach einer exakten Lehrbuchzahl. Die folgende Tabelle zeigt, wo die Literatur diese Gruppe am häufigsten im FTIR platziert, geordnet nach gesammelten Belegen.
Charakteristische FTIR-Peaks für Silicon-oxygen (Si-O)
| Wellenzahl (cm⁻¹) | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| 800 | 62 | 56 | 1,0 |
| 1100 | 61 | 50 | 1,0 |
| 1000 | 48 | 44 | 1,0 |
| 1080 | 40 | 35 | 1,0 |
| 1030 | 25 | 22 | 1,0 |
| 460 | 22 | 21 | 1,0 |
| 795 | 20 | 17 | 1,0 |
| 1050 | 19 | 17 | 1,0 |
| 1090 | 19 | 16 | 1,0 |
| 470 | 17 | 15 | 1,0 |
| 960 | 16 | 13 | 1,0 |
| 1200 | 15 | 12 | 1,0 |
| 798 | 14 | 14 | 1,0 |
| 1035 | 14 | 14 | 1,0 |
| 900 | 14 | 13 | 1,0 |
| 950 | 14 | 13 | 1,0 |
| 1040 | 14 | 13 | 1,0 |
| 1060 | 13 | 12 | 1,0 |
| 796 | 13 | 11 | 1,0 |
| 980 | 12 | 12 | 1,0 |
| 1036 | 12 | 12 | 1,0 |
| 780 | 12 | 11 | 1,0 |
| 1070 | 12 | 11 | 1,0 |
| 790 | 12 | 11 | 1,0 |
| 694 | 11 | 10 | 1,0 |
| 1097 | 11 | 10 | 1,0 |
| 450 | 11 | 10 | 1,0 |
| 600 | 11 | 10 | 1,0 |
| 1082 | 11 | 9 | 1,0 |
| 930 | 11 | 8 | 1,0 |
Zeigt die 30 am besten gestützten Peaks von insgesamt 757 für Silicon-oxygen (Si-O) an.
Mögliche Materialien
Spektrumslogik
Eine funktionelle Gruppen-Zuordnung wird sicherer, wenn mehrere erwartete Banden gemeinsam auftreten. Verwenden Sie diese Seite, um die am stärksten gestützten Peaks zu finden, und bestätigen Sie dann, dass dieselbe Probe ein kohärentes Muster und nicht einen einzelnen isolierten Treffer aufweist.
Praktische Anwendung
Diese Seiten sind nützlich für die Analyse unbekannter Materialien, die Erklärung von Peaks in Berichten, die Fehlerbehebung bei Polymeren und die Überprüfung, ob eine in Frage kommende Materialfamilie chemisch plausibel ist.
Häufige Fehler
- Verwendung einer Seite für funktionelle Gruppen als vollständiges Materialurteil, ohne den Rest des Spektrums zu überprüfen.
- Annahme, dass die stärkste Bande immer die diagnostischste ist.
- Vergessen, dass Verarbeitung, Zusatzstoffe, Alterung und Mischungen erwartete Peaks verschieben oder verbreitern können.
Beratung zur Verifizierung
Verwenden Sie DSC, GC-MS oder TGA, wenn mehrere Materialfamilien ähnliche Banden aufweisen oder wenn Mischeffekte die FTIR-Zuordnung unsicher machen.
Literatur hinter diesen Zuweisungen
-
3429 cm⁻¹ Vertrauen 1,0
“The FTIR spectra of the cm-1 montmorillonite-carbon nanotube nano filler display bands at 3429, 1076, and 798 which correspond to OH functional groups, Si-O-Si stretching, and Si-O-Si vibration, respectively.”
Synthesis and Physical Properties Characterization of Montmorillonite-modified Carbon Nanotubes Filler DOI: 10.1088/1757-899X/546/4/042004 -
1089 cm⁻¹ Vertrauen 1,0
“FTIR spectra showed peaks at 1089 and cm-1, 801 which corresponded to asymmetric and symmetric O-Si-O.”
Fabrication of Biogenic Silica Nanostructures from Sorghum bicolor Leaves for Food Industry Applications DOI: 10.1007/s12633-020-00379-4 -
1106 cm⁻¹ Vertrauen 1,0
“cm(cid:2)1, 1040¨1180 Acknowledgments It shows a weak peak at 1106 which is attributed to the stretching vibration of Si-O.”
Structural characterization of β-SiC nanowires synthesized by direct heating method DOI: 10.1016/j.msec.2005.09.083 -
788 cm⁻¹ Vertrauen 1,0
“Various peaks 323 cm-1), were detected which correspond to O-Si-O stretching vibrations of silica group (788 -O324 cm-1), CH/C-O stretch for the O-CH and C-OH of sugar unit in cellulose (1034 OH in-plane 325”
Balan 等 - 2021 - Esterification of residual palm oil using solid ac DOI: 10.1016/j.jtice.2012.07.001 -
1000 cm⁻¹ Vertrauen 1,0
“In the spectrum peaks are observed cm-1 cm-1 in the region of 1258.88 corresponding to methyl, between 1000 - 1100 a peak cm-1 corresponding to the Si-O-Si bond and a band at 792.10 characteristic of the siloxanes, confirming the presence o”
Fabrication of a silver particle-integrated silicone polymer-covered metal stent against sludge and biofilm formation and stent-induced tissue inflammation DOI: 10.1038/srep35446 -
1009 cm⁻¹ Vertrauen 1,0
“3.3 Topographical analysis Si-O-Si modes.20 breathing The spectra display asymmetric cm(cid:1)1, stretching at 1009 which corresponds to the presence of The topographical investigation of pristine the PC, PC/FAC and PC/GFACwerestudiedbyAFM.”
Thin film encapsulation of nano composites of polycarbonate (PC) for thermal management systems DOI: 10.1039/c4ra10183a -
1096 cm⁻¹ Vertrauen 1,0
“The peak shown cm1 at 1096 was tells about the formation of Si-O-Si asymmetric stretching vibration in the fingerprint region [22].”
Banoth 等 - 2022 - Sustainable Thermochemical Extraction of Amorphous DOI: 10.21203/rs.3.rs-657645/v1 -
522 cm⁻¹ Vertrauen 1,0
“Si-O in-plane bending vibration of silicate u4 Si-O out-of-plane bending vibration of silicate 522.”
Theoretical and experimental study of structures and properties of cement paste: The nanostructural aspects of C–S–H DOI: 10.1016/j.jpcs.2011.05.001
Sehen Sie Silicon-oxygen (Si-O) in Ihrem eigenen Spektrum
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.
