Acetyl — FTIR-Absorptionspeaks und Zuordnungen
Dies sind die charakteristischen FTIR-Wellenzahlen, bei denen Acetyl tendenziell absorbiert, zusammengestellt aus veröffentlichter Literatur und nach unterstützenden Belegen geordnet. Jede Zuordnung ist auf eine Quelle (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Acetyl wird normalerweise durch die Suche nach einem wiederkehrenden Cluster charakteristischer Peaks zugeordnet, nicht nach einer exakten Lehrbuchzahl. Die folgende Tabelle zeigt, wo die Literatur diese Gruppe am häufigsten im FTIR platziert, geordnet nach gesammelten Belegen.
Charakteristische FTIR-Peaks für Acetyl
| Wellenzahl (cm⁻¹) | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| 1730 | 9 | 9 | 1,0 |
| 1735 | 8 | 7 | 1,0 |
| 1740 | 6 | 6 | 1,0 |
| 1734 | 5 | 5 | 1,0 |
| 1737 | 3 | 3 | 1,0 |
| 1720 | 3 | 3 | 1,0 |
| 1739 | 3 | 3 | 1,0 |
| 1733 | 3 | 3 | 1,0 |
| 1240 | 3 | 3 | 1,0 |
| 1728 | 3 | 2 | 1,0 |
| 1633 | 3 | 2 | 1,0 |
| 1238 | 2 | 2 | 1,0 |
| 1738 | 2 | 2 | 1,0 |
| 1731 | 2 | 2 | 1,0 |
| 1234 | 2 | 2 | 1,0 |
| 1320 | 2 | 2 | 1,0 |
| 1727 | 2 | 1 | 1,0 |
| 1424 | 1 | 1 | 1,0 |
| 1579 | 1 | 1 | 1,0 |
| 1718 | 1 | 1 | 1,0 |
| 1375 | 1 | 1 | 1,0 |
| 1366 | 1 | 1 | 1,0 |
| 1729 | 1 | 1 | 1,0 |
| 1222 | 1 | 1 | 1,0 |
| 1420 | 1 | 1 | 1,0 |
| 1255 | 1 | 1 | 1,0 |
| 1408 | 1 | 1 | 1,0 |
| 1642 | 1 | 1 | 1,0 |
| 1736 | 1 | 1 | 1,0 |
| 1123 | 1 | 1 | 1,0 |
Zeigt die 30 am besten gestützten Peaks von insgesamt 73 für Acetyl an.
Spektrumslogik
Eine funktionelle Gruppen-Zuordnung wird sicherer, wenn mehrere erwartete Banden gemeinsam auftreten. Verwenden Sie diese Seite, um die am stärksten gestützten Peaks zu finden, und bestätigen Sie dann, dass dieselbe Probe ein kohärentes Muster und nicht einen einzelnen isolierten Treffer aufweist.
Praktische Anwendung
Diese Seiten sind nützlich für die Analyse unbekannter Materialien, die Erklärung von Peaks in Berichten, die Fehlerbehebung bei Polymeren und die Überprüfung, ob eine in Frage kommende Materialfamilie chemisch plausibel ist.
Häufige Fehler
- Verwendung einer Seite für funktionelle Gruppen als vollständiges Materialurteil, ohne den Rest des Spektrums zu überprüfen.
- Annahme, dass die stärkste Bande immer die diagnostischste ist.
- Vergessen, dass Verarbeitung, Zusatzstoffe, Alterung und Mischungen erwartete Peaks verschieben oder verbreitern können.
Beratung zur Verifizierung
Verwenden Sie DSC, GC-MS oder TGA, wenn mehrere Materialfamilien ähnliche Banden aufweisen oder wenn Mischeffekte die FTIR-Zuordnung unsicher machen.
Literatur hinter diesen Zuweisungen
-
2886 cm⁻¹ Vertrauen 1,0
“The peak component in the composite fibers, therefore the absorption intensity of modified wood pulp was appeared at cm-1 peak at 2886 and 1459 which corresponds to the cm-1 1746 due to grafting of acetyl groups.”
Awal 等 - 2012 - Thermal analysis and spectroscopic studies of elec DOI: 10.1007/s10973-011-1875-0 -
1089 cm⁻¹ Vertrauen 1,0
“The sharp band at 1089 corresponds The PVA used in this work were obtained in powder form to C-O stretching of acetyl group present on the PVA back from M/s.”
Bhajantri 等 - 2006 - Microstructural studies on BaCl2 doped poly(vinyl DOI: 10.1016/j.polymer.2006.03.054 -
1030 cm⁻¹ Vertrauen 1,0
“The band at 1518 is generally ascribed to cm-1 C-H bending vibration and the band at 1030 assigned to C-O stretching of acetyl groups present in PVA.”
Devi 等 - 2019 - Structural and optical studies on PVA capped SnS f DOI: 10.1088/1674-4926/40/5/052101 -
1730 cm⁻¹ Vertrauen 1,0
“Hemicelluloses were the first to degrade as proved by the initial decrease cm-1 of the 1730 peak due to the breaking of acetyl groups in xylan.”
Esteves 等 - 2013 - CHEMICAL CHANGES OF HEAT TREATED PINE AND EUCALYPT DOI: 10.4067/S0718-221X2013005000020 -
3300 cm⁻¹ Vertrauen 1,0
“It is possible (NS, LAS, and HAS), which can be confirmed by the that HAS sample has a more electronegative surface cm-1 peak at 3300 which is commonly attributed to than LAS sample, as more acetyl groups were incorstretching of -OH groups”
Felipe Tirado 等 - 2017 - EVALUATION OF THE COAGULANT CAPACITY OF STARCH OBT DOI: 10.20937/RICA.2017.33.esp01.11 -
1149 cm⁻¹ Vertrauen 1,0
“At 1149.37 the sharp band was observed which corresponded to the C-O stretching of acetyl group present on the back bone of PVA.”
Gopinath 等 - 2023 - Mechanical, structural and optical properties of p DOI: 10.15251/JOR.2023.191.23 -
1435 cm⁻¹ Vertrauen 1,0
“In contrast, the paramecompletely cm-1 introduction of acetyl groups weakens the formation of interand ters including peaks associated with the C O at 1733 and cm-1, hydrogen bonds and gives rise to the disruption of intramolecular 1435 and”
Synthesis, optimization and characterization of acetylated corn starch with the high degree of substitution DOI: 10.1016/j.ijbiomac.2013.04.080 -
1242 cm⁻¹ Vertrauen 1,0
“cm-1 The peak at 1242 of raw spectrum was EFB The moisture content (2-5%) seems to be necessary for attributed to a waxy acetyl group of hemicellulose ester the best reaction.”
Jahi 等 - 2020 - Empty Fruit Bunch Cellulose based Sorbent for Oil DOI: 10.17576/jsm-2020-4909-29
Sehen Sie Acetyl in Ihrem eigenen Spektrum
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.