What absorbs at 645 cm⁻¹ in an FTIR spectrum?
A band near 645 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 3 cited sources
Resposta rápida
A band near 645 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Possíveis atribuições de grupos funcionais
| Grupo funcional | Fatos de suporte | Fontes citadas | Maior confiança |
|---|---|---|---|
| Secondary amine | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Metal oxygen | 1 | 1 | 1,0 |
| Bromine | 1 | 1 | 1,0 |
| Carbonate | 1 | 0 | 1,0 |
| C c single bond | 1 | 0 | 1,0 |
A classificação reflete a evidência acumulada da literatura, não uma única regra autoritária. Sempre confirme com o contexto da sua amostra.
Materiais possíveis
| Material | Picos de suporte | Grupos sobrepostos | Fontes citadas |
|---|---|---|---|
| chitosan | 645, 1650, 1655 | N h | 1 |
| magnetite | 645, 1740, 1263 | Metal oxygen | 1 |
| iron oxide | 645, 1130, 891 | Metal oxygen | 1 |
Os materiais são mostrados apenas quando o mesmo conjunto de literatura suporta esta banda e pelo menos um pico característico adicional.
Lógica do espectro
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 645 cm⁻¹ is usually not enough for material identification by itself.
Uso no mundo real
Este tipo de consulta é comum em identificação de polímeros, triagem de plásticos desconhecidos, solução de problemas de CQ, verificação de materiais reciclados e revisão de atribuição de picos apoiada pela literatura.
Erros comuns
- Tratar uma banda isolada como prova de um material sem verificar pelo menos um ou dois picos de suporte.
- Ignorando sobreposição: vários grupos funcionais podem contribuir próximo ao mesmo número de onda.
- Ignorar a validação quando aditivos, misturas, oxidação ou contaminação podem distorcer o espectro.
Conselho de verificação
Quando a ambiguidade persistir, valide a hipótese com DSC, GC-MS ou TGA, especialmente para misturas, amostras degradadas e polímeros carregados.
Literatura por trás destas atribuições
-
Bromine confiança 1,0
“The cm(cid:0) Br-C 1 sensitive PLA-naringin coaxial electrospun fiber membrane, was stored absorption peaks at 645, 506, and 3500 were caused by the ◦C, Br-C”
Preparation of pH-sensitive polylactic acid-naringin coaxial electrospun fiber membranes for maintaining and monitoring salmon freshness DOI: 10.1016/j.ijbiomac.2021.08.087 -
confiança 1,0
“In Figure 2, the FTIR spectra reveal the three characteristic peaks at 552 cm-1, 645 cm-1, and 990 cm-1 which are attributed to the Fe-O bond [50].”
Yadav 等 - 2020 - Synthesis and Characterization of Amorphous Iron O DOI: 10.3390/nano10081551 -
N h confiança 1,0
“1,645cm-1 can be attributed to the -NH bending vibration Figure 3.”
Yakar 和 Dede - 2022 - Production and Characterization of Healing Polymer DOI: 10.3389/fmats.2022.910761
Tem um espectro com esta banda?
Carregue seu espectro FTIR e obtenha um relatório de interpretação completo — atribuições de picos com citações da literatura, correspondências de biblioteca e uma cadeia de evidências com nível de confiança — em segundos.