What absorbs at 597 cm⁻¹ in an FTIR spectrum?
A band near 597 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 7 cited sources
Quick answer
A band near 597 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Возможные назначения функциональных групп
| Функциональная группа | Подтверждающие факты | Цитируемые источники | Максимальная достоверность |
|---|---|---|---|
| Acetate | 1 | 1 | 1,0 |
| Chitosan | 1 | 1 | 1,0 |
| Metal oxygen | 1 | 1 | 1,0 |
| Sulfate (SO4) | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| Chlorine | 1 | 1 | 1,0 |
Ранжирование отражает накопленные литературные данные, а не единственное авторитетное правило. Всегда проверяйте в контексте вашего образца.
Possible materials
| Материал | Поддерживающие пики | Overlapping groups | Цитируемые источники |
|---|---|---|---|
| polypropylene | 597, 1030, 1600 | Acetate | 1 |
| Fe3O4 | 597, 2358, 1673 | Metal oxygen, Acetate | 1 |
| composite | 597, 1703, 1295 | Acetate | 1 |
| hematite | 597, 1030, 469 | Metal oxygen | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 597 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Литература, лежащая в основе этих назначений
-
достоверность 1,0
“1, 1 cerning temperature originated by the thermo-oxidative 2340 cmand the peak at 597 cmis a representative degradation and informative with the corresponding of C-Cl stretc.hing vibrations (Nirmal Ghosh et al.”
Current plastics pollution threats due to COVID-19 and its possible mitigation techniques: a waste-to-energy conversion via Pyrolysis DOI: 10.1186/s40068-020-00217-x -
Phosphate (PO4) достоверность 1,0
“finally, two strong and sharp peaks at 597 and 560 cm-1 are attributed to the triple degenerate antisymmetric bending mode of the [PO 4]3group [9] (Table 5).”
Structural Characterization of Low-Sr-Doped Hydroxyapatite Obtained by Solid-State Synthesis DOI: 10.3390/cryst13010117 -
Sulfate (SO4) достоверность 1,0
“cm-1 cm-1 at 666 and 597 represent the stretching and bending vibration of sulfate, the peak at peaks at 666 cm-1 and 597 cm-1 represent the stretching and bending vibration of sulfate, the peak at cm-1 cm-1 1096 is the stretching vibration”
Inhibition of Poly(ethylenediaminetetraacetic acid-diethanolamine) on Deposition of Calcium Sulfate Crystal in Simulated Industrial Water DOI: 10.3390/cryst10060544 -
достоверность 1,0
“The characteristic vibra- (S-O stretch) and around 668 and 597 cm-1 (S-O tions of sulfate can be seen at 1100 cm-1 bends) [13].”
Assessment of Easily Accessible Spectroscopic Techniques Coupled with Multivariate Analysis for the Qualitative Characterization and Differentiation of Earth Pigments of Various Provenance DOI: 10.3390/min12060755 -
Metal oxygen достоверность 1,0
“4a, FT-IR spectrum of Fe 3O displays a strong absorp4 cm-1 tion band at 597 belonging to the tetrahedral structure of trivalent Fe-O absorption.”
Silver incorporated into g-C3N4/Alginate as an efficient and heterogeneous catalyst for promoting click and A3 and KA2 coupling reaction DOI: 10.1038/s41598-021-93239-z -
Chitosan достоверность 1,0
“cm-1 bands at 1,597 and 1,615 In this study, solid-state NMR spectra revealed the in the FTIR spectrum of functional groups of chitosan acetate salt in its molecular chitosan.”
Fernandez Cervera 等 - 2011 - Effects of Spray Drying on Physicochemical Propert DOI: 10.1208/s12249-011-9620-3 -
достоверность 0,9
“Explicit assignment in text.”
Plata Lievano 和 Carreno Diaz - 2016 - Synthesis and Characterization of 1-Methyl-3-Metho DOI: 10.1590/1980-5373-MR-2015-0561
Есть спектр с этой полосой?
Загрузите свой FTIR-спектр и получите полный отчет об интерпретации — назначение пиков с цитированием литературы, совпадения с библиотекой и цепочку доказательств с оценкой достоверности — за секунды.